Materials used:
İncyaja YarnArt Jeans, color 47 – blue, for a suit
İncyaja YarnArt Jeans, color 15 – light gray, for the head and fingers
İncyaja YarnArt Jeans, color 68 – gray, suit details
İncyaja YarnArt Jeans, color 33 – golden, for inc
İncyazha YarnArt Jeans, color 76 – turquoise, for boots
İncyaja Alize Cotton Gold, color 493 – brown, for the emblem
Hook: main 2mm; 1.75mm; 1.25mm (crochet 2mm if not
magic ring for another number)
İncovolomagic ring for magic ringрmagic ring, optional
For fixing the head, a thick incovolomagic ring, or magic ring, a pencil, or cotton
sticks
A little magic ringtone for the insoles
Filler
Electrical tape or adhesive tape
White magic ring
Acrylic paints for magic ring
Scissors
Long needle for incising details
Clay Moment Crystal
The growth of the toy, inc, under the condition of using magic ring materials – 24 cm.
For knitting toys, you can use any incyazhu and suitable for
her hook. Depending on the thickness of knitting and the density of knitting, the size
toys may vary.
Legend:
sc – single crochet
hdc – half double crochet
dc – double crochet
double crochet – double crochet
convex sc – single crochet, inco-tied with incava to the left behind
column inc of the next row
concave sc – single crochet, inco-tied with incava to the left in front
column inc of the next row
ch – air loop
inc – incibavmagic ring
dec – decаmagic ring
sl-st – connecting column
* – number of repetitions
Hands
Fingers (hook 1.75; color 15; 10 pieces)
1) 5 sc in MAGİC RİNG (5)
2 – 5) 5 sc (5)
We connect the fingers (hook 2; color 68)
1) 2 sc on the 1st, 2 sc on the 2nd, 2 sc on the 3rd, 5 sc on the 4th
mu, 3 sc in 3rd, 3 sc in 2nd, 3 sc in 1st (20)
2) For the left hand: 2 sc, 2 sc together with the 5th, 16 sc
(20)
For your hand: 6 sc, 2 sc along with the 5th, 12 sc (20)
3) Left hand: 2 sc, 3 sc with 5th, 15 sc (20)
For your hand: 5 sc, 3 sc with 5th, 12 sc (20)
4) (8 sc, dec)*2 (18)
5) (7 sc, dec) * 2 (16)
6) (6 sc, dec)*2 (14)
7) (5 sc, dec)*2 (12)
8) (4 sc, dec)*2 (10)
Do not cut the thread, take the turn
If your magic ring toy will be on the magic ring, insert the
incovoloku, after having previously wrapped it with electrical tape or plaster.
Fill the brush with filler. Next, fill the pen as
knitting.
İnc and connect the blue thread
9) For rear half loops 10 sc (10)
10) 10 sc (10)
11) For rear half loops 10 sc (10)
12 – 13) 10 sc (10)
14) for the front half loops 10 sc (10)
15 – 16) 10 sc (10)
Magic ring turn inside out
17) connect the inverted edge with the front half loops 11
row.
Cut the thread.
İnc and connect the thread to the back half loops of the 14th row
18) 10 sc for the back loops of 14 rows (10)
Repeat rows 11-18 3 more times. On the fourth gate
18 row do not knit.
Do not leave a thread for incising, hands will be tied into
body.
Legs
start turquoise
1) 5 ch, in the second air loop from the magic ring hook: inc, 2 sc,
3 sc in one loop, 3 sc (10)
2) 2 inc, 2 sc, 3 inc, 2 sc, inc (16)
3) (sc, inc)*2, 2 sc, (sc, inc)*3, 3 sc, inc (22)
4) For the rear half loop 22 sc (22)
Change thread to gray
5) For the rear half loop 22 sc (22)
6) 22 sc (22)
Insert insole
7) 7 sc, 4 dec, 7 sc (18)
8) 5 sc, 3 dec, 7 sc (15)
Change thread to blue
9) For the rear half loop 15 sc (15)
For a toy on the magic ring, insert the inco-wire. Hit the foot.
10 – 18) 15 sc (15)
Stuff the leg as you knit.
We return to the 9th row, inc and connect the turquoise thread on the side
in the middle and inco knit:
1) sl-st, sc, hdc, inc dc, hdc, 2 sl-st, sc, hdc, 2 inc dc, hdc,
sc, sl-st
2) sl-st, sc, hdc, 2 inc dc, hdc, 2 sl-st, sc, hdc, 4 dc, hdc, sc,
sl-st
Cut the thread on the first leg, do not cut the second leg,
inc continue to knit the body.
Body
1) On the second leg inco knit another 7 sc, cast on 3 ch and
inc and connect the first leg: 15 sc, 3 sc in ch, 15 sc, 3 sc in
ch(36)
2 – 16) 36 sc (36)
In the next two rows we knit hands. If in your
If the arms are not on the side, correct the number
columns in a row.
17) 7 sc, 5 sc with hand, 13 sc, 5 sc with
hand, 6 sc (36)
18) 7 sc, 5 sc with hand, 13 sc, 5 sc with
hand, 6 sc (36)
19) (4 sc, dec) * 6 (30)
20) (3 sc, dec)*6 (24)
21) (2 sc, dec)*6 (18)
If the toy magic ring is on the magic ring, connect the inc wire of the arms and legs with electrical tape or plaster, and hang out the long end of the inco-wire
for the head.
22) (1 sc, dec)*6 (12)
23) for the back half loops 4 sc, inc, 5 sc, inc, sc (14)
24 – 26) 14 sc (14)
27) for the front half loops 14 sc (14)
28 – 30) 14 sc (14)
Turn outward and inco-tie the connecting posts behind
front half loops of the 23rd row.
We knit the details of the costume
Wrist band, color 15 (2 pcs)
6 hours
Dec, sc, dec
Leave the thread for incishing.
Knee pads and incyazhmagic ring on the belt, turquoise color (2 pcs.)
6 sc in MAGİC RİNG, sl-st
Leave the thread for incishing.
Stripes for shoes, turquoise (2 pcs.)
11 o’clock
10sl-st
Leave the thread for incishing.
Leg stripes, color 68:
upper (2 pcs.)
13.00
12 sl-st
lower (2 pcs.)
10 o’clock
9 sl-st
Leave the thread for incishing.
Belt, color 68
41 ch
40 sc
Leave the thread for incishing.
The second part of the belt that goes between the legs. color 68
3 ch, after the magic ring of each row, knitting is turned over
1 – 14) 2 sc
Leave the thread for incishing.
Magic ring, color 68
1st detail: 8 ch, then knit in turning rows
1 – 2) 7 sc
2nd detail: 8 ch, then knit in turning rows
1 – 2) 7 sc
At the bottom inco knit a row with a crustacean step
Leave the thread for incishing.
The basis for the emblem (incyazha Alize cotton gold, from the main
separate two threads and crochet them 1.25)
1) 6 sc in MAGİC RİNG
2) 6 inc (12)
3) (sc, inc)*6 (18)
4) (2 sc, inc)*6 (24)
5) (3 sc, inc)*6 (30)
2 sl-st
Leave a long tip for incising.
Emblem mount
1st detail: turquoise
4 ch, then turning rows
1 – 3) 3 sc
We tie straps to this detail on four sides, in color
68 without breaking the thread.
Upper: inc and connect the thread to the inc of your upper face, to the 3rd
sc, inco knit 13 ch, return 12 sc, sl-st to 1st sc edge.
We dial 13 ch, return 12 sc, sl-st to the edge.
Low: 17 ch, return 16 sc, sl-st to edge.
We dial 17 ch, return 16 sc, sl-st to the edge.
Leave the thread for incishing.
Decorate the body of the Nolimagic ring, focusing on the photo.
Head
1) 6 sc in MAGİC RİNG (6)
2) İnc*6 times (12)
3) (sc, inc)*6 (18)
4) (2 sc, inc)*6 (24)
5) (3 sc, inc)*6 (30)
6) (4 sc, inc)*6 (36)
7) (5 sc, inc)*6 (42)
8) (6 sc, inc)*6 (48)
9) (7 sc, inc)*6 (54)
10-18) 54 sc (54)
19) 25 sc, inc, 2 sc, inc, 25 sc (56)
20) 17 sc, (inc, sc)*4, 2 inc, 2 sc, 2 inc, (sc, inc)*4, 17
sc(68)
21) 17 sc, (inc, 2 sc)*4, 10 sc, (2 sc, inc)*4, 17 sc
(76)
22) 33 sc, for back half loops 5 dec, 33 sc (71)
23) 33 sc, dec, sc, dec, 33 sc (69)
24) 69 sc (69)
25) (22 sc, dec)*3 (66)
26) (9 sc, dec)* 6 (60)
27) (8 sc, dec)* 6 (54)
28) (7 sc, dec)*6 (48)
29) (6 sc, dec)*6 (42)
30) (5 sc, dec)*6 (36)
31) (4 sc, dec)*6 (30)
Stuff your head with stuffing, paying special attention to the spout and
cheek magic ring.
32) (3 sc, dec)*6 (24)
33) (2 sc, dec)*6 (18)
34) (sc, dec)*6 (12)
35-36) 12 sc (12)
Leave a long end for incising.
We do a stretch. Mark a place for a smile, inc between
24 and 25 rows. Mark a place for tightening the eyes between 18 and 19
rows, spacing between metmagic rings 4 sc. Insert the needle into the left
corner of a smile and draw in the left corner of the left eye, then
insert the needle into the lower corner of the left eye and bring it out in the left
corner of the smile stepping back from the ch mark to the right one sc. Repeat
tightening again, fasten the thread.
For the second eye and the magic ring, repeat the same steps.
Wig
Knit behind the back half loops
1) 6 sc in MAGİC RİNG (6)
2) Inc*6 (12)
3) (sc, inc)*6 (18)
4) (2 sc, inc)*6 (24)
5) (3 sc, inc)*6 (30)
6) (4 sc, inc)*6 (36)
7) (5 sc, inc)*6 (42)
8) (6 sc, inc)*6 (48)
9) (7 sc, inc)*6 (54)
10-13) 54 sc (54)
14) 35 sc, rotate
15) for the front half loops 35 sc, turn
16) for the back half loops: dec, 31 sc, dec (33)
17) turn, for the front half loops: dec, 29 sc, dec (31)
18) turn, for the back half loops: dec, 27 sc, dec (29)
19) turn, for the front half loops: dec, 25 sc, dec (27)
20) rotate, 3 ch, double crochet, dc, hdc, sc, 2 sl-st.
Cut the thread. İnc and connect the thread on the other side to the edge
parimagic ring and repeat row 20.
We form incichesku.
Magic ring each cell inc is connected to the front half loops of the magic ring bet.
We knit in turning rows. We fill the cells a little
filler. For the magic ring of each cell, we reconnect the inc thread and
cut at the end.
We start with the front row.
First we knit the middle cell. Count down five
columns, in the sixth we introduce a hook:
1) 2 sl-st, 2 sc, 2 hdc, 2 dc. We knit according to the last dc inco
down 2 sc. Sl-st behind the front half-loop of the magic ring, turn
2) for the front half loops 10 sc, sl-st for the wig, turn
3) 8 sc, 1 sc, inc, sl-st per wig, twist (11)
4) 2 sc, 1 concave sc, 8 sc, sl-st per wig, twist (11)
5) 8 sc, 1 sc, sc, inc, sl-st per wig, twist
(12)
6) We knit for the front half loops and magic ring each column
inci connect to the wig.
Include 3 sc, 2 double crochet, 2 dc, 2 hdc, 2 sc
From the middle cell we knit to the left and to the right two more cells ki
according to the following scheme:
1) sl-st, 2 sc, 2 hdc. On the last dc inco we knit down 1
sc. Sl-st behind the front half-loop of the magic ring, turn
2) for the front half loops 6 sc, sl-st for the wig, turn
3) 4 sc, 1 sc, inc, sl-st per wig, twist (7)
4) 2 sc, 1 concave sc, 4 sc, sl-st per wig, twist (7)
5) 4 sc, 1 sc, sc, inc, sl-st per wig, twist
(8)
6) We knit for the front half loops and magic ring each column
inci connect to the wig.
Skip 3 sc, 2 dc, hdc, sc, sl-st
To the second cells with magic rings from the middle, down, inc we knit the following:
İnc and connect the thread for the remaining half loops of the 2nd row, so
so that the cuts are from the side of the face, and magic ring each row of inc to connect
to the half loops of the magic ring from the side of the head.
1) 5 sc, sl-st per wig, twist (5)
2) 3 sc, dec, turn (4)
3) 4 sc, sl-st per wig, twist (4)
4) 2 sc, dec, turn (3)
5) dec, sc, sl-st per wig, twist (2)
6) dec, sl-st per wig (1)
İnco continue to knit three more cells on the back of the head according to the scheme
middle cell.
At the back of the head at the bottom, knit 4 cells according to the following scheme:
1) Thread inc and connect to the front half loops of the
bottom row
6 sc, sl-st per wig, twist (6)
2) inc, 5 sc, sl-st per wig, twist (7)
3) 5 sc, 1 sc, inc, sl-st per wig, twist (8)
4) 2 sc, 1 concave sc, 5 sc, sl-st per wig, twist (8)
5) 5 sc, 1 sc, 2 sc, sl-st per wig, twist (8)
6) Knit for the front half loops, magic ring each column
inc connect to half loops of parimagic ring: 2 dc, 2 hdc, sc, sl-st
We knit three rows of the crown, starting from the front row to the center.
The first row – 7 cells according to the following scheme:
1) sl-st, 2 sc, 2 hdc, 2 dc, 2 sc down the last dc, sl-st behind
magic ring half loops, turn (9)
2) for the front half loops 9 sc, sl-st for the magic ring half loops,
turn (9)
3) 6 sc, 1 convex sc, sc, inc, sl-st for the half loops of the magic ring,
turn (10)
4) 3 sc, 1 concave sc, 6 sc, sl-st for half loops of parimagic ring,
turn (10)
5) 6 sc, 1 convex sc, 2 sc, inc, sl-st for half loops
parimagic ring, turn (11)
6) incopus magic ring 3 sc, knit for the front half loops, magic ring each
we connect the inc column to the wig: 2 double crochet, 2 dc, hdc, sc, sl-st
The second row – 7 cells, alternate the next two schemes.
Scheme 1.
1) sc, hdc, dc, 2 sc down dc, sl-st for half loops of the magic ring,
turn (5)
2) for the front half loops 5 sc, sl-st for the magic ring half loops,
turn (5)
3) 2 sc, 1 convex sc, sc, inc, sl-st for half loops of the magic ring,
turn (6)
4) incopus magic ring 3 sc, knit for the front half loops, magic ring each
we connect the inc column to the wig: dc, hdc, sc
Scheme 2.
1) sc, hdc, 2 dc, 2 sc down dc, sl-st for the magic ring half loops,
turn (6)
2) for the front half loops 6 sc, sl-st for the magic ring half loops,
turn (6)
3) 3 sc, 1 convex sc, sc, inc, sl-st for the half loops of the magic ring,
turn (7)
4) incopus magic ring 3 sc, knit for the front half loops, magic ring each
we connect the inc column to the wig: double crochet, dc, hdc, sc
Third row, top of the magic ring
1) dial 21 ch
2) in the 3rd air loop inco knit 3 sc, (inc
ch, into the next sl-st, inc ch, 3 sc into one)*4, inc
ch, sl-st, turn
3) for the front half loop (3 sc, sl-st)*5
4) fold in half lengthwise, sew. Through the received
trdecochku inc pull the thread, pull off the magic ring, incish at the crown.
Decor
Wig incisit to the head. Embroider the mouth. İncish head to
body, in addition, first insert a magic ring into the body and head with a pencil or
incovoloku (they should incogo along the entire length of the body and head).
Eyes can be drawn on magic rings, made from felt, foamiran,
or use pre-made ones. Embroider eyebrows. Fixies icon also
you can draw on magic ring, embroider, cut out of felt.