NECESSARY MATERIALS:
1. Plush inc
– Himalaya dolphin baby 1 skein number 80320. – Lavitayarn a little in a magic ring as an additional color number 4005. 2. Hook 3 or 3.5
3. Cotton or semi-cotton thread for tightening the muzzle, embroidery and incising details. 4. Eyes 16 mm. 5. Nose 14 – 16 mm. 6. Filler. 7. Tailor’s pins. 8. Scissors. 9. Yarnart jeans fabric for clothes: – white (01), – green (69) – pink (20) colors. 10. Hook 2. 11. Eyes for a cap 8 mm.
Handles (2 parts)
The right and left handles are knitted the same way. We start knitting with an additional color. 1r. 6 sc. in MAGIC RING
2 rub. 6 inc. (12)
3 rub. (1 sc., inc.) * 6 (18)
4r. 18 sc. In the 5th row, change the color to the main one (body color)
5 rub. 18 sc. 6r. 4 sc., dec., 7 sc., dec., 3 sc. (16)
7r. dec., 12 sc., dec. (14)
We fill the handles loosely until the 7th row. While stuffing, we form fists and palms. 8 rub. 2dec., 6 sc., 2 dec. (10)
9r. – 17 rub. 10sc. (9 rows)
We knit
several sc. For
leveling
knitting. Folding the part
in half and
We knit 4 sc. We cut the threads and
inc everything inside the details.
Legs (2 parts) We begin knitting
additional color. 1r. 6 sc. in MAGIC RING
2 rub. 6 inc. (12)
3 rub. (1 sc., inc.) * 6 (18)
4r. – 5 rub. 18 sc. (2 rows)
In the 6th row we change the color to
primary (body color)
6r. (7 sc., dec.) * 2 (16)
7r. (6 sc., dec.) * 2 (14)
8 rub. – 9 rub. 14 sc. (2 rows)
10 rub. (5 sc., dec.) * 2 (12)
11r. 12sc. 12 rub. 6 Dec. Next we tighten the hole and cut the thread. Next we make markings for
legs using pins:
Count 8 rows from
start of knitting and between 8 and 9
Place a pin in rows. Then after another 3 rows
put another pin. In total you need
mark the 10th pinmagic ring mi those
places where the loops of the legs will be, forming a circle from the pins, magic ring to the magic ring shown in the photo. And we begin to knit the legs in the middle at the back. Make sure that the marker
walked exactly in the middle and
knit with main color
(body color)
1r. 10sc. 2 rub. 2 sc., inc., 4 sc., inc.,
2sc. (12)
3 rub. 12sc. 4r. 3sc., inc., 4 sc., inc., 3
sc. (14)
5 rub. 14 sc. 6r. 5 sc., 4 inc., 5 sc. (18)
7r. – 8 rub. 18 sc (2 rows)
Next, we cut the thread on one leg and leave it on one leg. Connecting the bits
1r. Keep your feet up
facing away from yourself and away
we do 1 on your leg
v.p. and put a marker
(center of the body).
Then we make another 1 ch. and inc we connect to the glue leg. Now we knit 18 sc. along the left leg, 2 sc. chain of chain loops, 18 sc. along the first leg and 1sc. chain of air loops. (40)
Make sure that the marker goes exactly in the middle, if necessary
make loops
offsets
2 rub. inc., 18 sc., 2 inc.,
18 sc., inc. (44)
3 rub. 44 sc. 4r. 18 sc., (1 sc.,
inc.) * 4, 18 sc. (48)
5 rub. – 7 rub. 48 sc. (3
row)
8 rub. 15 sc., (1 sc.,
dec.) * 6, 15 sc. (42)
9r. – 10 rub. 42sc. (2
row)
As you knit, fill the body and legs with fillers. 11 rub. (5 sc., dec.) * 6 (36)
12 rub. – 13 rub. 36 sc. (2 rows)
14 rub. (4 sc., dec.) * 6 (30)
15 rub. (3 sc., dec.) * 6 (24)
16 rub. 24 sc. We stuff the neck well so that it holds the head well. In the 17th row we will knit the handles.
We hold hands
so that
palmmagic ring was with
internal
sides. 17r. 4 sc., 4 sc. with hand, 8 sc., 4
sc. with hand, 4
sc. (24)
18 rub. (2 sc., dec.) *
6 (18)
19 rub. – 20 rub. 18 sc. (2 rows)
Let’s do s.s. in the next sc., fasten the thread and cut it. HEAD1r. 6 sc. in MAGIC RING
2 rub. (1 sc., inc.) * 3 (9)
3 rub. 9sc
4r. (2 sc., inc.) * 3 (12)
5 rub. 12sc. 6r. (1 sc., inc.) * 6 (18)
Now make sure that the marker
walked exactly in the middle. Do as necessary
bias loops. 7r. 6 sc., 6 inc. from HDC, 6sc.(24)
8 rub. 6 sc., (1 HDC., inc. fromHDC)* 6, 6 sc. (thirty)
9r. 6 sc., (2 HDC., inc. fromHDC)* 6, 6 sc. (36)
10 rub. 6 sc., (3 HDC., inc. of HDC) * 6, 6 sc. (42)
11r. 6 sc., (4 HDC., inc. of HDC) * 6, 6 sc. (48)
12 rub. – 13 rub. 48 sc. (48)
We place the nose in the 2nd row from the beginning of knitting. We place the eyes in the 7th row at the beginning and at the end of the incibavok from HDC. The distance between the eyes of the magic rings is 12 HDC. 14 rub. (6 sc., dec.) * 6 (42)
15 rub. (5 sc., dec.) * 6 (36)
16 rub. 36 sc. 17r. (4 sc., dec.) * 6 (30)
18 rub. (3 sc., dec.) * 6 (24)
19 rub. (2 sc., dec.) * 6 (18)
20 rub. (1 sc., dec.) * 6 (12)
21. 6 Dec. then tighten the ring, cut it off,
we secure it and inc. Ears (2 parts).
1r. 6 sc. in MAGIC RING
2 rub. 6 inc. (12)
3 rub. (1 sc., inc.) * 6 (18)
4r. 1 sc., inc., (2 sc., inc.) * 5, 1 sc. (24)
5 rub. (3 sc., inc.) * 6 (30)
6r. 2 sc., inc. (4 sc., inc.) * 5, 2 sc. (36). Now let’s add
ear in half and
inc knit 3 sc. behind both walls, so that
in the future in this
kind of incish them to
head
The first magic ring pull is the magic ring eye pull: Take a needle with an incline thread and enter it in the middle from the bottom of the head (1) and bring it out to the outer corner of the eye (2). Then we go into the inner corner of the eye (3) and bring the needle out through the adjacent sc. at the bottom of the head (1) (near the tail of the magic ring thread). We go with the needle to the same place where the tail is, and repeat the same with the second eye. So we remove the needle through the adjacent sc. Then we tighten the strings, we see the magic ring and the magic ring eyes appear. We achieve the effect we need and tie the threads together. We do not cut the threads short. We put them inside our heads. Now We make the second tightening – wearing a magic ring tightening. We insert the needle in the middle from the bottom of the head (1) and remove it near the inner corner of the eye (2). Now we put the thread on top of the fabric of the nose and insert the needle next to the inner corner of the other eye (3) and bring the needle out in the middle from the bottom of the head (1). Next, we tighten the threads and tighten the nose, tie the threads, cut them and insert them into the head. The nose turns up a little.
Embroider the whites:
I did not embroider the squirrels
plush inc, and white
thread yarnart jeans. Take a needle and thread and
enter it from the bottom of the head
in the middle and bring it to
lower outer corner of the eye,
then add in
a thread along the contour of the eye and
insert the needle into the upper
outer corner of the eye. We repeat the same with the second eye. Embroidering eyelashes:
We also insert a needle from the bottom of the head in the middle and take it out 1 row to the side. Then we fold the thread over the top corner of the eye and insert the needle into the upper inner corner of the eye. We repeat the same with the second eye. If desired, you can glue false eyelashes on for a sweeter look.
We embroider the eyebrows 2 rows above the eyes. I braced myself, folded in half. Now we will sew on the ears:
I stitched the ears with regular black sewing thread.
We sew the ears on
eye level, stepping back from
there are 3-4 rows of them. AND
We incise the ears in a circle. In addition, we will make embroidery on the magic ring arm and magic ring knife.
Pens:
We insert the needle from the inside of the arm in the 3rd row from the beginning of knitting and bring the needle out in the 3rd row to the outside. We put the thread along the handle and again insert the needle on the inside, but now we bring it out 2sc. Vincavoi is one row lower. Now again we put the thread along the handle and insert the needle in the 3rd row from the inside. And we bring the needle 2 sc to the left and one row below. Place the thread along the handle and insert the needle in 3 rows
the inside. We bring the needle into
original point. Cut off the thread, tails
we tie up the threads
inc inside the handle. We do the same with magic rings
most. And the tail remains! It’s very easy to make it, we take it inc and inc the thread is connected to the body using a connecting loop, we collect 20 air loops and that’s it!
The tail is ready!
We fasten the thread and
cut off.
KNITTING A HAT AND A SCARF HATMAGİC RING:
We start knitting with the main (green) color. 1r. 6 sc. in MAGIC RING
2 rub. 6 inc. (12)
3 rub. (1 sc., inc.) * 6 (18)
4r. (2 sc., inc.) * 6 (24)
5 rub. (3 sc., inc.) * 6 (30)
6r. (4 sc., inc.) * 6 (36)
7r. (5 sc., inc.) * 6 (42)
8 rub. (6 sc., inc.) * 6 (48)
9r. (7 sc., inc.) * 6 (54)
10 rub. (8 sc., inc.) * 6 (60)
11r. – 13 rub. 60 sc. (3 rows)
We will knit rows 14 and 15
for the front half loops. 14 rub. (1 sc., inc.) * 6 (90)
15 rub. (2 sc., inc.) * 6 (120)
Next we do s.s. V
next sc.,
fasten the thread and
cut it off.
EYES FOR THE HAT:
We start knitting with an additional (white) color 1p. 6 sc. in MAGIC RING
2 rub. 6 inc. (12)
3 rub. (1 sc., inc.) * 6 (18)
4r. (2 sc., inc.) * 6 (24)
We place the eyes in the 2nd row. In the next row, change the color to the main one (green) and knit it using the back half loops
5 rub. 24 sc. Next we knit on both walls
6r. – 7р 24 sc. (2 rows)
8 rub. (2 sc., dec.) *6 (18)
9r. (1 sc., dec.) * 6 (12)
10 rub. 6 Dec.
CHEEKS FOR THE HAT:
1r. 6 sc. in MAGIC RING
2 rub. 6 inc. (12)
All that remains is to sew the cheeks and eyes to the hat and you’re done!!! SCARF:
1r. We cast on 5 air loops and from 2 loops on the magic ring hook we knit 4 sc. 2 rub. turn the knitting, make an air loop and
knit 4 sc. Next we knit in turning rows and at the beginning of the magic ring of each row we make a lifting loop. 3 rub. – 86 rub. 4 sc. You can make a scarf
shorter or longer. Adjust the length
on one’s own. DECONS (2 pcs.)
1r. 6 sc. in MAGIC RING
2 rub. 6 inc. (12)
3 rub. (1 sc., inc.) * 6 (18)
4r. – 5 rub. 18 sc. (2 rows)
6r. (1 sc., dec.) * 6 (12)
7r. 6 Dec. we tighten
hole, fasten the thread
and cut it off.