Required:
1. Yarn Lanoso Alara 50 g – 140 m cotton with acrylic (white, green, crimson,
orange – 1 skein and a little pink and red and black for
facial design).
2. Hook No. 3, knitting needles No. 3.5 for hair and overalls.
3. Pink and green ribbons, eye buttons, pink and
green flower-shaped, thin elastic band for a cap
4. Filling – padding polyester.
5. Wire for arms and legs, double-sided tape, colorless “Moment” glue, dough for
modeling (from a set for children’s creativity), material for insoles (any plastic
capacity)
Abbreviations:
CH – air loop
SC – single crochet
Prib – increase (from 1 SC knit 2 SC)
Dec – decavage (from 2 SC knit 1 SC)
Persons satin stitch – odd rows – knit stitches, even rows – purl stitches.
Persons n. – front loop
Out. p. – purl loop
Prib (when knitting) – from one loop, knit 2 loops – one behind the front
wall, the second behind the back wall of the loop.
Dec (when knitting) – knit two stitches together
2 together – knit 2 stitches together
Edge – edge loop
TORSOM:
Knit with white thread.
Row 1: 2CH, 6 SC in 2nd stitch from hook (6)
2nd row: (inc) x 6 times (12)
Row 3: (1 SC, inc) x 6 times (18)
Row 4: (2 SC, inc) x 6 times (24)
Row 5: (3 SC, inc) x 6 times (30)
Row 6: (4 SC, inc) x 6 times (36)
Row 7: (5 SC, inc) x 6 times (42)
Rows 8-15: 42 SC around (42)
Take a piece of wire 40 cm long and insert it between the 7th and 8th rows (inner part 4
cm, leg length 12 cm, foot 6 cm). Wrap one leg with double-sided tape
as follows: cut a strip of 1.5 from the tape (I had tape 3.5 cm wide)
cm, place it along the wire, remove the top non-stick strip and press the tape
to the wire, etc. along the entire length of the leg.
Then wrap it with white thread in 2 layers – top to bottom and bottom to top. Thread the thread inside
body and wind from the inside. Do the same for the second leg.
Row 16: (5 SC, dec) x 6 times (36)
17-19 row: 36 SC in a circle (36)
Row 20: (4 SC, dec) x 6 times (30)
21-23 row: 30 SC in a circle (30)
Stuff the lower part of the body with filling.
Row 24: (3 SC, dec) x 6 times (24)
Rows 25-27: 24 SC around (24)
Row 28: (2 SC, dec) x 6 times (18)
Rows 29-31: 18 SC around (18)
Fill the body with filler up to the 25th row.
Fasten the loop, cut the thread.
Take a piece of wire 30 cm long and insert it between rows 26 and 27 (inner part
3 cm, arm length 10.5 cm, palm 3 cm). Make sure your legs and arms are on the same page
level. Bend the ends of the wire to form palms.
Wrap one hand with double-sided tape, then with white thread in 2 layers – from top to bottom and
down up. Pass the thread inside the body and wind it from the inside. Do the same for the second one
hand. To prevent the threads from jumping off your palms, you can coat the ends of your palms a little
colorless glue “Moment”.
Stuff the upper body.
HEAD:
Knit with white thread.
Fill with filler as you knit.
Row 1: 2CH, 6 SC in 2nd stitch from hook (6)
2nd row: (inc) x 6 times (12)
Row 3: (1 SC, inc) x 6 times (18)
Row 4: (2 SC, inc) x 6 times (24)
Row 5: (3 SC, inc) x 6 times (30)
Row 6: (4 SC, inc) x 6 times (36)
Row 7: (5 SC, inc) x 6 times (42)
8th row: 42 SC in a circle (42)
Row 9: (6 SC, inc) x 6 times (48)
10-17 row: 48 SC in a circle (48)
Row 18: (6 SC, dec) x 6 times (42)
Row 19: 42 SC around (42)
Row 20: (5 SC, dec) x 6 times (36)
Row 21: 36 SC around (36)
Row 22: (4 SC, dec) x 6 times (30)
Row 23: (3 SC, dec) x 6 times (24)
24 row: (2 SC, dec) x 6 times (18)
Fasten off the loop and leave the thread for stitching.
FACE DESIGN:
Cheeks (2 pieces):
Knit with pink thread.
Row 1: 2CH, 6 SC in 2nd stitch from hook (6)
2nd row: (inc) x 6 times (12)
Row 3: (1 SC, inc) x 6 times (18)
Fasten the loop, leave the thread for sewing.
Nose:
Knit with red thread.
Row 1: 2CH, 6 SC in 2nd stitch from hook (6)
2nd row: (inc) x 6 times (12)
Rows 3-5: 12 SC around (12)
Fasten the loop, leave the thread for sewing.
Sew on buttons – eyes, embroider the mouth with red thread, sew on the nose and cheeks,
embroider the eyebrows with black thread.
Hairstyle:
Cast on 50 stitches using orange yarn and knit in stockinette stitch
cloth 15 cm high. Then steam this cloth with an iron and soak in glue
solution (1 tablespoon of PVA glue per glass of water), dry. Next outline
pin the hair area. Unravel the fabric in 1 row, cut the resulting
spiral thread into 2 parts and attach to the head.
Sew the head to the body.
FOOT FORMATION:
Bend the stop wire in half. Draw the shape of the sole you want on paper.
Cut 2 insoles from a plastic container according to the drawn template. Glue
tape the foot to the insole. Before working with the dough, it is better to place the top part
toys in a bag so as not to accidentally get dirty.
Form the dough into slippers of the shape you require. You can link first
the sole of the slippers (description below) and use it to guide you when making insoles.
You need to wait a few hours for the dough to dry and harden.
Small cracks that form in the dough can but fill it with Moment glue.
SLIPPERS:
Knit with crimson thread.
1st row: 13 CH, starting from 2 loops from the hook – 11 SC, 4SC in the last loop,
on the reverse side of the chain – 10 SC, inc in the last loop.
2nd row: (inc)., 10 SC, (inc) x 4 times, 10 SC, (inc) x 2 times
Row 3: (inc), 12 SC, (inc, 1 SC) x 4 times, 12 SC, (inc)
4th row: 40 SC in a circle (40)
5th row: 40 SC in a circle behind the back wall (40)
Change color to green.
Rows 6-8: 40 SC around (40)
9 row: 14 SC, (dec), 2 SC, (dec) x 2 times, 2 SC, (dec), 14 SC (36)
Row 10: 12 SC, (dec) x 6 times, 142 SC (30)
Row 11: (dec), 9 SC, (dec), 4 SC, (dec), 9 SC, (dec) (26)
Put the slippers on your foot and knit further.
Row 12: (dec), 8 SC, (dec), 2 SC, (dec), 8 SC, (dec) (22)
Next, make decals until the pile of dough is closed.
Decorate the slippers with pink and green ribbons.
OVERALLS:
Left pant leg: Cast on 10 stitches using green thread.
1-2 row: 10 persons. smooth surface
3rd row: (Inc) x 10 times (20)
Row 4: purl 20
Row 5: (approx, k1) x 10 times (30)
Rows 6-14: K30. smooth surface
Row 15: (dec), knit 26, (dec) – (28)
Row 16: (dec), knit 24, (dec) – (26)
Row 17: (dec), knit 22, (dec) – (24)
Row 18: (dec), knit 20, (dec) – (22)
Move the loops onto the pin, cut the thread, leaving the end.
Knit the right leg in the same way with raspberry thread.
Transfer all stitches to one needle. Then continue knitting the left half
overalls with a green thread, and the right one – crimson.
19 – 34 row: 22 stockinette stitch green, 22 stockinette stitch raspberry (44)
Row 35: knit 1, knit 7, knit 5, knit 17, knit 5, knit 6, knit 1. (34)
Row 36: 1 chrome, 7 purl, cast on 7 loops, 180 purl, cast on 7 loops, 7 purl, 1 chrome. (48)
Rows 37-42: K48. smooth surface
Row 43: 1 chrome, (2 together, 1 yarn over) x 11 times, knit 2, (yarn over, 2 together) x 11 times, 1 yarn over (48)
Rows 44-46: K48. smooth surface
Close all loops.
Steam the overalls. Sew buttons in the shape of a flower: pink – on green
side, green – to the raspberry side. Sew the two sides center front for
formation of the perineum. Sew seams on the legs, connecting the front and back.
Put the overalls on the doll. Sew the pieces together at the center back using a mattress stitch.
Take a green ribbon and a pink ribbon and connect them together.
Thread the ribbon through the holes and tie a bow.
CAP:
We knit with green thread.
Row 1: 2CH, 6 SC in 2nd stitch from hook (6)
2nd row: 6 SC in a circle (6)
3rd row: (inc) x 6 times (12)
4-5 row: 12 SC in a circle (12)
Row 6: (1 SC, inc) x 6 times (18)
7-8 row: 18 SC in a circle (18)
Row 9: (2 SC, inc) x 6 times (24)
10-11 row: 24 SC in a circle (24)
Row 12: (3 SC, inc) x 6 times (30)
13-14 row: 30 SC in a circle (30)
Row 15: (4 SC, inc) x 6 times (36)
16-17 row: 36 SC in a circle (36)
Row 18: (5 SC, inc) x 6 times (42)
19-20 row: 42 SC in a circle (42)
Row 21: (6 SC, inc) x 6 times (48)
22-23 row: 48 SC in a circle (48)
24 row: (7 SC, inc) x 6 times (54)
25-26 row: 54 SC in a circle (54)
Pompon:
Make a pompom from raspberry yarn. To do this, make 2 circles out of cardboard
with a diameter of 4.5 cm outer circle and 1 cm inner circle. Take a thread 2-3 meters long and
wrap circles. Cut the yarn by inserting scissors between two circles. Pull the thread
between the circles, pull tightly and tie several knots. The pompom is ready.
Attach the pompom to the cap.
Thread a thin elastic band from the sides of the cap, put the cap on the doll’s head and
adjust the length of the elastic band.