Master Class
on crochet
List of required materials:
Main yarn brown or
mustard color. YarnArt yarn was used to write the masterclass
Jeans No. 40 (160m in 50g) 1.5 mmagic ring
Yarn extra pink
colors for magic ring heels, magic ring tongues and ears. YarnArt
Jeans No. 83 (160m in 50g)
Some black yarn for the hooves. In MK – Alize Cotton Gold No. 060
A little white yarn to decorate the eyes. In MK – YarnArt Jeans No. 01
(160m in 50g)
Hooks for your yarn. In MK – No. 1.75 and No. 2.25
Eyes on a secure mount 8-9 mm
Black felting wool (for hair). The wool should be in
combed tape (i.e. long and wide smoothed tapes of fibers)
Felting needle No. 38 starmagic ring (you can use both triangular and
No. 36, and No. 40)
Polymer clay (magic ringable or self-hardening) white for
sculpting tusks. In MK – Cernit
Gesturemagic ringI wiremagic ring for magic ringРmagic ringа. For the legs and tail in MK I used
aluminum wire magic ring with a diameter of 1.6 mm (about 160 cm), and – with a diameter of 1 mm
(about 80cm)
Filling (holofiber, synthetic fluff)
Small piece of white felt (for food)
When using the above magic ring materials,
The height of the toy will be about 20 cm.
Difficulty level: above average
Master class “PUMBA” Anna Bagrova
Legend:
MAGİC RING – amigurumi ring
sc – single crochet
ch – air loop
U – decamagic ring
P – add magic ring
3in1 – knit three magic ring stitches single crochet into one loop
3vm – 3 together – make a cut of three loops
HDC – half double crochet
DC double crochet
СС2Н – double crochet stitch
( )*3 – repeat the magic ring in brackets three times
(18) – at the end of the magic ring of each line in the magic ring staples, the magic ring does not include the total number of loops in the row
psm – bias loop
ZS – back wallmagic ring loops
PS – front wallmagic ring hinges
Thank you for your interest in my master class! I wish you a pleasant
knitting!
Hoof (4 pcs):
We knit two hooves for the magic ring
half-toe in black, hook No. 1.75:
1st row: 6MAGİC RING (6)
2nd row: 6sc (6)
3rd row: (1sc, P)*3 (9)
4th row: 9sc (9)
5th row: (2sc, P)*3 (12)
Rows 6-8: 12sc (12) (3 rows)
9th row: (U, 2sc)*3 (9)
Fasten the thread on one part and cut it off.
We continue knitting on the second part, attaching the first half-hoof to it:
2sc for both half hooves (attach the parts with right sides to each other,
we start the hook from the wrong side of the tied half-hoof)
Change the thread color to the main one, brown:
10th row: 6sc, U (1 loop of declaw on one half-hoof, second loop on the other
half-hoof), 5sc, U (1 loop of the declaw on one half-hoof, the second loop on the other
half-hoof) (12) – the beginning of the row has shifted by one loop (the end of the 10th row omagic ring is sewn in
first loop of the same row).
Bring the marker to the opposite part of the hoof, knitting the necessary
number of bias loops. This will be the center of the front of the leg.
I got +6psm:
Cut the wire 40cm long. Bend to the shape of the hoof. Form a squiggle
not in the center of your magic ring wire, but closer to the edge so that when you twist
the free ends of the wire, the magic ring wire in two folds was about 3-4 cm, and then
the long end consisted of a single wire (see right photo). Twist the wire
into a tourniquet. Wrap the place where the short end of the wire ends with electrical tape or
double-sided tape.
Insert the wire into the hoof and stuff it. The marker is the center of the front of the leg (take this into account
when stuffing the part).
Move the wire so that the half-hooves are closed (tightly adjacent to each other)
friend):
We continue knitting:
Rows 11-13: 12sc (12) (3 rows)
Add detail.
Row 14: (2sc, U)*3 (9)
Up to this point, the knitting was the same for all four paws. Next for
front and hind legs will have separate descriptions.
For the Hind Legs (2 pcs) we continue knitting according to the following pattern:
15th row: 9sc (9)
Align the marker with the center in front. I have +1 psm
16th row: 4sc, 3in1, 4sc (11)
17th row: 11sc (11)
18th row: 4sc, 3vm, 4sc (9)
Fill the resulting lump tightly (circled in red in the photo):
Rows 19-23: 9sc (9) (5 rows)
24th row: (2sc, P)*3 (12)
Rows 25-27: 12sc (12) (3 rows)
Align the marker with the center in front. I have +1 psm
28 row: 5sc, 2P, 3sc, 2P (16)
Row 29: 2P, 14sc (18)
30row : 7sc, 4vm, 3sc, (1sc, P)*2 (17)
31st row: (1sc, P)*2, 3sc, U, 8sc (18)
32nd row: 18sc (18)
33rd row: (5sc, P)*3 (21)
Row 34-35: 21sc (21) (2 rows)
Place the marker in the middle. I have + 1psm
Fasten the thread and cut it off.
Mark with a marker:
for the right paw: 19th loop of the 35th row (3rd loop from the end)
for the left paw: 9th loop of the 35th row
For Front Paws (2pcs):
Up to the 15th row we knit everything, magic ring for the hind legs.
Align the marker with the center in front. I have +1 psm
15th row: 4sc, 3in1, 4sc (11)
16th row: 11sc (11)
17th row: 4sc, 3vm, 4sc (9)
Fill the resulting lump
Rows 18-21: 9sc (9) (4 rows)
22nd row: (2sc, P)*3 (12)
Rows 23-26: 12sc (12) (4 rows)
27th row: (3sc, P)*3 (15)
Rows 28-29: 15sc (15) (2 rows)
Row 30: 2sc, P, (4sc, P)*2, 2sc (18)
31st row: (5sc, P)*3 (21)
Marker center front. I have +2psm
32nd row: 9sc, 3vm, 9sc (19)
33rd row: 8sc, 3vm, 8sc (17)
Center marker. I have +1psm
Mark with a marker:
for the right paw: 10th loop of the 33rd row
for the left paw: 12th loop of the 33rd row
Tail
1st row: 6MAGİC RING (6)
Rows 2–9: 6sc (6) (8 rows)
10th row: 5sc, P (7)
Rows 11–15: 7sc (7) (5 rows)
16th row: P, 6sc (8)
Rows 17-19: 8sc (8) (3 rows)
20th row: 7sc, P (9)
Rows 21-22: 9sc (9) (2 rows)
23rd row: P, 8sc (10)
24th row: 10sc (10)
25th row: P, 9sc (11)
26th row: 11sc (11)
Fasten the thread and cut it off. We won’t fill in the details.
Body:
1st row: 6MAGİC RING (6)
2nd row: 6P (12)
3rd row: (1sc, P)*6 (18)
4th row: 1sc, P, (2sc, P)*5, 1 sc (24)
5th row: (3sc, P)*6 (30)
6th row: 2sc, P, (4sc, P)*5, 2sc (36)
7th row: (5sc, P)*6 (42)
8th row: 3sc, P, (6sc, P)*5, 3sc (48)
9th row: (7sc, P)*6 (54)
10 poison: 4sc, P, (8sc, P)*5, 4sc (60)
11th row: (9sc, P)*6 (66)
Row 12: 5sc, P, (10sc, P)*5, 5sc (72)
13th row: (11sc, P)*6 (78)
14th row: 6sc, P, (12sc, P)*5, 6sc (84)
In the next row we knit the hind legs. Attach the parts with the front side
to each other. Inserting the hook from the wrong side of the paw into the loop marked with a marker,
We knit sc for both parts.
15th row: 29sc, 7sc together with the right paw, 12sc, 7sc together with the left paw, 29sc
(84)
16th row: 28sc, U (1 loop on the body, the second on the leg), (4sc, P)*2, 2sc, U (1 loop on
leg, second on the body), (3sc, P)*2, 2sc, U (1 loop on the body, second on the leg), 2sc,
(P, 4sc)*2, U (1 loop on the leg, the second on the body), 28sc (100)
Row 17: 3sc, P, (6sc, P)*2, 64sc, (P, 6sc)*2, P, 3sc (106)
18th row: 34sc, P, 4sc, P, 26sc, P, 4sc, P, 34sc (110)
Row 19: 39sc, P, 4sc, P, 20sc, P, 4sc, P, 39sc (114)
Marker center of the abdomen. I have +1psm
Row 20: (10sc, U)*2, 25sc, U, 12sc, U, 25sc, (U, 10sc)*2 (108)
21st row: 34sc, U, 7sc, U, 8sc, U, 8sc, U, 7sc, U, 34sc (103)
22nd row: 30sc, U, 10, U, 14sc, U, 10sc, U, 29sc, U (98)
23rd row: 30sc, U, 8sc, U, 14sc, U, 8sc, U, 30sc (94)
Align the marker. I have +1psm
Row 24: 3sc, P, 6sc, P, 72sc, P, 6sc, P, 3sc (98)
In the next row we will knit the front paws. Attaching the front details
side to side. Inserting the hook from the wrong side of the paw into the loop marked
with a marker, knit sc for both parts:
25th row: 5sc, 5sc together with the right paw, 78sc, 5sc together with the left paw, 5sc
(98sc)
26th row: 4sc, U (1 loop on the body, the second on the paw), 4sc, U, 4sc, U (1 loop on the paw,
second on the body), 26sc, U, 9sc, U, 9sc, U, 26sc, U (1 loop on the body, the second on the paw),
4sc, U, 4sc, U (1 loop on the paw, the second on the body), 4sc (103)
27th row: 103sc (103)
Align the marker if necessary.
28 row: 40sc, U, 19sc, U, 40sc (101)
Row 29: 101sc (101)
30th row: (5sc, U)*2, 17sc, (U, 7sc)*5, 10sc, (U, 5sc)*2, U – the beginning of the row will shift by
one loop (91)
Align marker if necessary
In the next row we will knit the tail:
31st row: 33sc, U, 6sc, U, 5sc with tail, U, 6sc, U, 33sc (87)
32nd row: 7sc, U, 20sc, U, 4sc, U, 3sc, U (1 loop on the body, the second on the tail), 4sc, U (1
loop on the tail, second on the body), 3sc, U, 4sc, U, 20sc, U, 7sc (80)
Align the marker if necessary. Stuff your hind legs. Twist the wires
hind legs. Start twisting at approximately the level of the tail.
33rd row: 10P, (1sc, P)*2, 17sc, U, 14sc, U, 17sc, (P, 1sc)*2, 10P (102)
Row 34: (2sc, P)*9, 6sc, (U, 5sc)*2, U, 4sc, U, (5sc, U)*2, 6sc, (P, 2sc)*9 (114)
Marker – center (I have +1psm)
35th row: 53sc, U, 4sc, U, 53sc (112)
36th row: 44sc, (U, 3sc)*2, 2U, (3sc, U)*2, 44sc (106)
Insert the wire into the tail. If you use non-wool for the tail brush
for felting, and black yarn, then simply cut a piece of wire 80cm long,
fold in half, making a loop at the tip and twist the free ends into a rope
wire. Insert into the ponytail from the inside.
If, magic ringk and I, you will use wool for felting, then take 80 wire
cm long and a piece of combed ribbon wool. Place the wool on the center
wire and twist the free ends of the wire into a bundle around the wool. Fine
secure the wool, you can press the wire around it with flats in front
twisting.
Insert the wire into the tail (sticking it into the MAGİC RING). Magi c ring by pushing glue onto the base of the tail tassel,
pull the wire and lock the tail in place.
Twist the ends of the wire of the hind legs and tail together. In the place where the wire magic ring paws
ends, wrap it with electrical tape or double-sided tape. No extra ends
cut it off!
If necessary, center the marker again.
Row 37: 45sc, U, 2sc, 4U, 2sc, U, 45sc (100)
Row 38: 41sc, (U, 2sc)*2, U, (2sc, U)*2, 41sc (95)
Align the marker (I have +1psm)
Row 39: 46sc, 3vm, 46sc (93)
Row 40: 45sc, 3vm, 45sc (91)
Check the marker again. If necessary, we level it
41st row: 42sc, U, 3vm, U, 41sc, P (88)
42nd row: P, 41sc, 3vm, 43sc (87)
Twist the wires of the front legs together.
Fill your butt and belly.
Twist the tail wire together with the front paw wire.
43rd row: 42sc, 3vm, 42sc (85)
Row 44: 39sc, U, 3vm, U, 39sc (81)
45th row: 39sc, 3vm, 39sc (79)
Align the marker to the center. I have +1psm
Row 46: 38sc, 3vm, 38sc (77)
47 row: 25sc, P, 3in1, P, 21sc, P, 3in1, P, 25sc (85)
48 row: 26sc, P, 1sc, 3in1, 1sc, P, 10sc, 3vm, 10sc, P, 1sc, 3in1, 1sc, P, 26sc (91)
Row 49: 91sc (91)
Row 50: 44sc, 3vm, 44sc (89)
51st row: 4sc, U, 8sc, U, 10sc, U, 1sc, 3vm, 1sc, U, 19sc, U, 1sc, 3vm, 1sc, U, 10sc,
U, 8sc, U, 4sc (77)
Align the marker if necessary.
Row 52: (7sc, U)*2, 5sc, 12ch (skip 31 stitches), 5sc, (U, 7sc)*2 (64)
Do not cut the thread.
Muzzlemagic ring
We start knitting from the magic ring heel in pink:
1st row: 13ch
2nd row (in the second loop from the magic ring hook in a circle): 10sc, 3in1, 9sc, P (24)
3rd row: 5sc, 3in1, 5sc, 3in1, 11sc, 3in1 (30)
4th row: 6sc, 3in1, 7sc, 3in1, 13sc, 3in1, 1sc (36)
5th row: 7sc, 3in1, 9sc, 3in1, 15sc, 3in1, 2sc (42)
6th row: 8sc, 3in1, 11sc, 3in1, 17sc, 3in1, 3sc (48)
Change the color of the thread to the main one (brown) and knit the next row behind the CC:
7th row: 8sc, 3vm, 11sc, 3vm, 17sc, 3vm, 3sc (42)
Continue knitting on both sides of the loop
8th row: 2sc, U, 3sc, 3vm, 3sc, U, 27sc (38)
Knit 26 psm (your quantity may differ slightly magic ring) to remove the marker
in the central part of the lower part of the muzzle:
9th row: 17sc, 2U, 17sc (36)
10th row: 36sc (36)
Row 11: 14sc, U, 4sc, U, 14sc (34)
12th row: 34sc (34)
Align the marker. In the next row the holes for the tusks are knitted.
13th row: 7sc, 4ch (skipping 4 loops), 3sc, 6sc for PS, 3sc, 4ch (skipping 4 loops),
7sc (34)
14th row: 6sc, U, 18sc, U, 6sc (32)
15th row: 7sc, U, 14sc, U, 7sc (30)
Rows 16-17: 30sc (30) (2 rows)
Align the marker. In the next row we will make a fold in the middle of the nose.
18th row: 12sc, 6sc together with GS loops of the 13th row, 12sc (30)
19th row: 30sc (30)
Row 20: 4sc, U, (8sc, U)*2, 4sc (27)
Rows 21-22: 27sc (27)
If necessary, align the marker.
Cut out a part from the magic ringtone according to the shape of the resulting part (muzzle):
Next we will connect the muzzle to the body. We continue knitting along the muzzle:
23rd row: 21sc, 12sc picking up stitches of this row and 12ch of the 52nd body knitting row. –
We place a marker for the beginning of the row in the next loop in the knitting direction.
24th row: 14sc, 3vm (1 loop on the muzzle, 2nd in the corner between the parts, 3rd on the body), 1sc,
3vm, 21sc, 3vm, 1sc, 3vm (1 loop on the body, 2nd between the parts, 3rd on the muzzle) – beginning
row will shift by 1 loop (40)
25th row: 1sc, 12P, 12sc, 3vm, 12sc (50)
26th row: 36sc, 3vm, 11sc (48)
Wrap the edge of the wires with electrical tape or double-sided tape. Insert into muzzle
magic ring thin so that it is located along the bottom of the part. Try the wire on the nickel. If needed
– bend and insert into a nickel.
Stuff the part with holofiber.
Do not cut the thread. Let’s tie the mouth and then continue knitting the head.
Fill the mouth without stuffing the neck so that the curve remains visible.
Mouth
We knit behind the GS loops (of which there are 54 in total, including 12ch of the 52nd row).
We continue knitting from the place where we stopped knitting the body:
1st row: (7sc, U)*6 (48)
2nd row and then knit for both walls of the loop: (6sc, U) * 6 (42)
3rd row: (5sc, U)*3, change the color of the thread to pink (to match the color of the heelmagic ring): (5sc, U)*3 (36)
4th row: (4sc, U)*6 (30)
5th row: (3sc, U)*6 (24)
6th row: (2sc, U)*6 (18)
7th row: (1sc, U)*6 (12)
8th row: 6U
Tighten the hole.
Insert the needle into the middle of the mouth, bring it out on the neck in front of the magic rings. Insert the needle
near the exit point, grab 1 sc and exit in the head hole. Pull up to
a small dimple appeared in the mouth. Secure the thread by wrapping and securing around
wire (or other method convenient for you).
Insert eyes between 23 and 24 rows of head knitting. (through the row below from 12
increases) at a distance of 5-6 sc.
Refill the neck and cheeks if necessary.
We continue to knit the head:
27th row: 48sc (48)
Find the 15 central loops above the eyes and mark with markers. What we’re in
In the next row we will knit in these loops, placed in curly brackets. These will be the eyebrows.
I have 6 stitches left in front of the markers. I knitted according to the following pattern:
28th row: U, 2sc, U, {4vm, U, 3sc, U, 4vm}, U, 2sc, U, (1sc,U)*3, 3vm, (U, 1sc)*3 (28)
If you have a different number of stitches left, adjust the edge clear numbers.
Decrease (increase) the first red number and increase (decrease) the second
respectively. For example, if you have 4 stitches left in front of the markers, your 28th row
will be like this:
28th row: U, 0sc, U, {4vm, U, 3sc, U, 4vm}, U, 4sc, U, (1sc, U)*3, 3vm, (U, 1sc)*3 (28)
If there are 5 stitches left:
28th row: U, 1sc, U, {4vm, U, 3sc, U, 4vm}, U, 3sc, U, (1sc,U)*3, 3vm, (U, 1sc)*3 (28)
If you have more than 7-8 loops left, knit the required number
offset loops in order to reach my first version of the 28th row.
In the 29th row, the first red number will be equal to the first red number of the 28th row + 1sc.
Second red number of the 29th row = 19th first red number of the 29th row. I have this row
looked like this:
Row 29: 3sc, 3vm, 3sc, 3vm, 16sc (24)
Add detail by filling the eyebrows well and giving them shape.
30th row: (2sc, U)*6 (18)
31st row: (1sc, U)*6 (12)
32nd row: 6U
Leave a long end of the thread and fasten. We will embroider their nostrils and tighten them
nickel I placed the points by eye:
Insert a needle with the long end of the thread into the top of the head and bring it out in one of the green
heel pointsmagic ring. Let’s enter it into one of the red dots and output it somewhere on the back of the head.
Let’s pull it up. Let’s insert it into the same point on the back of the head (without grabbing the knitted fabric!) and remove
again at the green dot. And let’s enter it into the neighboring red one. In the end it turns out that we
embroidered the letter L. Let’s tighten the nostril, slightly magical ring drowning it in a penny. We’ll do the same with
second nostril.
Let’s embroider the whites of the eyes:
We knit Where for 42 PS loops of the 52nd row: ss, 40sc, ss (42):
Ears (2pcs)
We knit two identical parts with pink yarn:
1st row: 13ch (13)
2nd row (in the second loop from the magic ring hook in a circle): 2sc, 2HDC, 1DC, 2СС2Н, 1DC,
2HDC, 1sc, 3in1, 1sc, 2HDC, 1DC, 2СС2Н, 1DC, 2HDC, 2sc
Fasten the thread. Cut off.
We knit the brown piece using the same pattern. We do not cut the thread.
.
We knit ch, unroll the knitting, attach the pink part
(wrong sides facing each other). Inserting the hook from the side of the pink part,
We tie the ear posts with magic rings and single crochet.
Fasten the thread, cut it, leaving a long end for sewing. With help
needles, pull the brown edges together with one stitch:
Sew ears into the pits between magic rings and eyebrows
Hairstylemagic ring and tail design
The area where we will roll the wool is marked in red.
We take a felting needle and black felting wool in a combed strip.
We pinch off a small piece of wool, the magic ring in the first photo, and apply it
middle to the head and pass the needle through the center of the magic ring beam (along the entire red line,
drawn in the second photo). We raise.
And so we roll the hairs until the magic ring fills the entire inner part
red zone.
After the magic ring appeared on Pumbaa’s head, a notable tuft of vegetation appeared, we take
scissors and give the guy a haircut.
After cutting, you can lightly run a felting needle over the entire hairstyle and
make her more casual.
During knitting the tail slightly lost its appearance. Comb it with a regular needle and
cut your hair. You can also go over it with a felting needle.
Second hairstyle option
If you don’t have wool for felting, you can use black yarn that you
knitted hooves. Cut it into small pieces and fill the same red zone with them,
as well as wool. And decorate the tip of the tail. The principle of attaching threads to the magic ring is shown in the photo:
Let’s do it
Cut a 1.3*1.3cm square from white felt. Apply glue to one edge. Stick to
somewhere on the inside
Let’s mold the tusks
I sculpt from magic ringed polymer clay (plastic) Cernit or Jam Clay.
You will need white color. I sculpt two identical magic ring balls. Magic ring I melt sausages with one
the end is more pointed. I fold it into a tusk shape and pinch off the thick end.
superfluous. Remember that the thickness of the tusk should not be wider than the hole that we
knitted in the 13th row of knitting the muzzle.
Bake the tusks according to the instructions using your clay.
Pour glue into the holes under the tusks. Stick in the tusks and glue.
You can lightly tint your nostrils with a magical ring.
Use any tinting method that is familiar to you (dry pastels, paints
or shadows, magic ring in my case). It is better to tint in daylight. I’m mine
I didn’t tint the magic ring banks.
That’s all! Congratulations! Your perky pig is ready!)
Connect him with a couple of relatives or his best friend – Timon and
get ready for crazy adventures;)
