This master class contains a complete description of incosesl-st and knitting toys,
inc interim photos of details. Additionally, a description of the knitting of the pdecashka is given.
The magic ring toy is knitted from the bottom up, “half-crossing the magic rings”, in a spiral, (if not the magic ring is different). Рdecашmagic ring is crocheted, “checkmarkmagic rings”. Upper legs, nose and tail
are tied in, the head and ears are incised.
İnc with the use of magic ring materials, the height of the finished toy is about 27
cm.
Mark the beginning of the magic ring of each row with a contrasting thread thinner than the one
from which you knit a toy.
The description does not contain tutorials and is intended for those who already
has basic crochet skills.
This description is my author’s development and is absolutely FREE.
Toys magic rings created according to this description, you can dispose of at your discretion.
İnc and pdeclimagic rings photos of finished works, I will be delighted if you magic rings please me,
magic ring by the author of the description.
Required materials and tools:
1. Hook matching your inc.
2. İncyazha YarnArt JEANS of any colors you choose. I have number 46 main and
No. 65 for the nose.
3. A little black and white thread to decorate the muzzle. Take the black one
thinner than the main one from which you will knit a toy. I used
“Openwork” from “Pekhorka” No. 02 (black 280 m / 50 gr.) Do not take for embroidery
the entire thickness of YarnArt JEANS, it will look on the muzzle of grdeco. Can it
divide. But white, for zdecov, take the entire thickness. I have this YarnArt
JEANS No. 62. For a mustache, you can use waxed thread with a round section,
with a diameter of 0.5 mm.
4. Filler.
5. Eyes on a secure mount 10 mm, or incisive, or glue (beads,
half a decusine – your choice).
6. White felt circles with a diameter of 15 mm for proteins.
7. Needle for incising details, scissors, pins, marker thread. Crepe magic ring
thread for tightening.
8. For the dressing, I used Yarnart Jeans No. 77 and No. 69
9. In the magic ring as an additional accessory, you can take ready-made glasses 57-60 mm
width.
Legend:
MAGİC RİNG – amigurumi ring
sc – single crochet
ch – air loop
p – loop of the next row
inc – incibavmagic ring
dec – decаmagic ring
sl-st – connecting column
(…)*X – repeat X times the magic ring given in the magic rings brackets
The number after the magic ring = means the total number of loops in the row
upper paws
1 row: 6 sc in MAGİC RİNG
2 row: 6 inc = 12
3-17 rows: = 12 sc
We stuff a little only the lower part of the paws.
Fold in half and inco knit 6 sc for both
walls. We fasten the thread and cut it off. We will paws
tie.
Nose
We dial 5 ch, from the second from the crochet magic ring loops we knit:
1 row: inc, 2 sc, 4 sc in 1 loop, 2 sc, inc = 12
2nd row: 2 inc, 2 sc, 4 inc, 2 sc, 2 inc = 20
3-4 rows: 20 sc
5th row: Dec 10
Fasten the thread and cut.
You can fill the spout with a light magic ring now, you can later. His
we will tie.
Head
1 row: 6 sc in MAGİC RİNG
2 row: 6 inc = 12
3 row: (1 sc, inc) * 6 = 18
4 row: (2 sc, inc) * 6 = 24
5 row: (3 sc, inc) * 6 = 30
6 row: (4 sc, inc) * 6 = 36
7 row: (5 sc, inc) * 6 = 42
8 row: (6 sc, inc) * 6 = 48
9 row: (7 sc, inc) * 6 = 54
10 row: (8 sc, inc) * 6 = 60
11-12 rows: 60 sc
13 row: (9 sc, inc) * 6 = 66
14-18 rows: 66 sc
In the next row we will knit the cheeks and
tie up the nose.
19 row: 19 sc, (1 sc, inc) * 6, 5 sc with 5 nose loops, (inc, 1 sc) * 6, 18 sc = 78
20 row: 37 sc, 5 sc on the remaining loops of the nose, 36 sc = 78
The spout is slightly stuffed with magic ring, if not stuffed before.
21-30 rows: 78 sc
If you are using eyes on a secure mount, then install them at this stage.
Between 17 and 18 rows. Between installation sites 6-8 sc. Center the eyes on the nose.
We take circles from felt. Careful not to
there is a wrinkle left, fold in half and make small cuts, shifting a little from
center to edge.
We turn the circles and make perpendicular cuts (as a result, we get a crosswise pattern). We insert eyes into them and fix them in
canvas.
Later, after doing the tightening, the felt can be
secure with glue.
31 row: (11 sc, dec) * 6 = 72
32 row: (7 sc, dec) * 8 = 64
33 row: (6 sc, dec) * 8 = 56
34 row: (5 sc, dec) * 8 = 48
35 row: (4 sc, dec) * 8 = 40
36 row: (3 sc, dec) * 8 = 32
37 row: (2 sc, dec) * 8 = 24
We stuff the head tightly, but without too much zeal
Keep in mind that there will be stretch marks. We fix the thread and inc inward.
Ears
These details are not stuffed
1 row: 6 sc in MAGİC RİNG
2 row: (1 sc, inc) * 3 = 9
3 row: (2 sc, inc) * 3 = 12
4 row: (3 sc, inc) * 3 = 15
5 row: (4 sc, inc) * 3 = 18
Page 5 of 11
6 row: (2 sc, inc) * 6 = 24
7 row: 24 sc
8 row: (3 sc, inc) * 6 = 30
9-23 rows: 30 sc
24 row: (3 sc, dec) * 6 = 24
25 row: 24 sc
26 row: (2 sc, dec) * 6 = 18
27 row: 18 sc
Fold the eyelet in half and tie together behind
both walls 9 sc. Leave the thread for incishing.
Tail
1 row: 6 sc in MAGİC RİNG
2 row: 6 inc = 12
3 row: (1 sc, inc) * 6 = 18
4-5 rows: 18 sc
6 row: (1 sc, dec) * 6 = 12
We fasten the thread and cut it off. We will tie the tail. Light magic ring stuff
it is possible now, it is possible after knitting.
Lower legs
1 row: 6 sc in MAGİC RİNG
2 row: 6 inc = 12
3 row: (1 sc, inc) * 6 = 18
4-9 rows: 18 sc
next we will knit the heel
10 row: 1 ch, turn, 1 sc inc, 9 sc, dec
11 row: 1 ch, turn, 1 sc inc, 7 sc, dec
12 row: 1 ch, turn, 1 sc inc, 5 sc, dec
13 row: 1 ch, turn, 1 sc inc, 3 sc, dec
knit to the marker, along the edge loops 4 more sc
14 row: continue knit 18 sc, including edge loops of the heel = 18
15 row: 18 sc
Page 6 of 11
16 row: (1 sc, dec) * 6 = 12
17-18 rows: 12 sc
19 row: (1 sc, inc) * 6 = 18
20 row: 18 sc
21 row: (2 sc, inc) * 6 = 24
22 row: 24 sc
We fix the thread on the first leg and cut it off. On the second we do not cut,
connect it with the first and continue knitting.
We cut the marker threads and put the legs side by side. We fix the junction so that it is symmetrical. If your degree of displacement
matches with mine, then on the first leg we count back 11 loops and
in the 12th we will connect with the second.
Body
We stuff tightly, in incosesl-ste knitting.
We knit a chain of 3 v / n, connect the paws.
1 row: 24 sc on the first leg, 3 sc
in a chain of ch, 24 sc in the second
leg, 3 sc in a chain of ch.
The total number of loops in a row =
54
We put a marker thread.
2 row: (8 sc, inc) * 6 = 60
3 row: 60 sc
4 row: (9 sc, inc) * 6 = 66
5-7 rows: 66 sc
in the 8th and 9th rows we knit a tail.
8 row: 61 sc, then 6 sc with
ponytail, capturing 1 loop of the next row = 66
We put the marker in the 9th row after the 66th loop,
loop count does not change.
Please note that your inc stitch offset may vary when knitting. Position the ponytail at the back
center.
9 row: = 61 sc, 6 sc for the remaining
tail loops, also, capturing 1
next row stitch = 66
For convenience, the marker thread can be pulled out and reinstalled,
before the first loop of the 10th row (after the 5th loop on the tail).
After the 10th row, I fill the feet and ponytail.
10-11 rows: 66 sc
12 row: (9 sc, dec) * 6 = 60
13 row: 60 sc
14 row: (8 sc, dec) * 6 = 54
15 row: 54 sc
16 row: (7 sc, dec) * 6 = 48
17 row: 48 sc
18 row: (6 sc, dec) * 6 = 42
19 row: 42 sc
20 row: (5 sc, dec) * 6 = 36
21-23 row: 36 sc
In the 24th row we will knit the upper paws. Stuff the main part
the calf is quite tight, but not completely. Leave about 1cm to inci
knitting the paws was comfortable for you and the filler did not get between
columns. Increasing the knitting points strictly according to magic rings: 6 sc each
together with magic rings, between them 12 sc.
Given my offset, I ended up with this:
24 row: 8 sc, 6 sc with the foot, 12 sc, 6 sc with the foot, 4 sc = 36
25 row: 36 sc
26 row: (4 sc, dec) * 6 = 30
27 row: (3 sc, dec) * 6 = 24
28 row: 24 sc
İncovyazyvaem a few more columns (at
I got 1 sc and sl-st in the next loop),
we fasten the thread at the back in the center of the back.
Leave about 50 cm for incising
heads. Remove the marker thread. tight
we fill the part to the end. İnc and incisivanie head, do not forget to knock in the neck
filler. For convenience, you can fix the head with the body with a knitting needle.
Magic ring
Let’s form the mouth and eye chadins
tightening. Mark the clubs with magic rings on the muzzle 6 points.
Let’s add the middle of the muzzle. It’s comfortable
to make by inciliating a thread, a knitting needle or a needle
down from the center of the nose. We put marks between 29 and 30 rows. Between
clubsmagic rings 2-3 sc.
Between the 18th and 19th rows we mark 4 more points from the outer and inner
corners of the eyes. From the inner corners, this is the beginning and end of the knitted magic ring. Between internal and external dotmagic rings 2-3 sc.
Insert the needle at point 1, leave the end of the thread about 25-30 cm, display
at point 2. Further to point 3, output at point 6.
We increase the thread so that it is magic ring under the eye and a felt circle, we tighten it, we tie it into 2 knots. Without cutting the thread, enter the point
6, output at point 5, then to point 4, output at point 1. Tighten,
tie a couple of knots. inc thread inside the head. Last knot
and the points of entry and exit of the threads can be carefully smeared with universal inc transparent glue. I have Moment Crystal.
İncishivaem ears
Fold the ear in half and
sew both sides together.
Then we incise to the head along
to your taste. I incised between
3 and 4 rows
Embroider with thin black thread
strip from nose to mouth. White
we embroider zdecki with a thread.
Optionally, you can add eyebrows, “folds”
over magic rings.
Rdecashmagic ring crochet
We knit in rotary rows with a lifting loop. Colors can be o combine, use melange knitting or sectional dyeing knitting, textured, woolen. The main thing is that it fits
thickness.
We dial 37 ch, in the opposite direction, from the 2nd loop from the magic ring hook:
1 row: 6 sc, 3 sc in 1 st, 4 sc, 3 sc in 1 st, 12 sc, 3 sc in 1 st, 4
sc, 3 sc in 1 st, 6 sc = 44; ch, turn
2 row: 44 sc, ch, turn
3rd row: 7 sc, 3 sc in 1 st, 6 sc, 3 sc in 1 st, 14 sc, 3 sc in 1 st, 6
sc, 3 sc in 1 st, 7 sc = 52; ch, turn
4 row: 52 sc, ch, turn
5 row: 8 sc, 3 sc in 1 st, 8 sc, 3 sc in 1 st, 16 sc, 3 sc in 1 st, 8
sc, 3 sc in 1 st, 8 sc, = 60; ch, turn
6 row: 60 sc ch, turn
7 row: 9 sc, chain magic ring of 6 ch, 12 sc inc inc magic ring, 18 sc, chain magic ring
out of 6 ch, 12 sc incl. magic ring, 9 sc, = 48; ch, turn
8 row: 8 sc, inc, 6 sc in chain stitches, inc, 16 sc, inc, 6 sc
on air loops, inc, 8 sc = 52; ch, turn
9 row: 52 sc ch, turn
We do not break the thread, we make a strapping (in corner loops of 3 sc):
along the edge up, neckline, along the edge down (do not forget inco loop 4-5 ch,
depends on the diameter of your button) and the bottom with a false “crustacean step”.
Or the bottom as well, we tie the pillars with magic rings without a crochet and return
the usual “crustaceous step.”
We fix the thread, incyachem all the tips and cut off. Рdecашmagic ring is ready.
Glasses
I used ready made ones. In the region of the bridge of the nose, the magic ring parted them slightly, straightening them a little.
Due to the rounded ends of the temples, they are quite inconsistently attached to
canvas.
Glasses can be made on your own using inco-wire, wire cutters
and any suitable diameter incedmet. You can tie them up
you can take incovoloku in a braid. In the photo, the magic ring is white, but it comes in different colors.
Glasses without temples can be secured to the bridge of the nose with a couple of stitches. Thanks to the upturned nose, it will be imperceptible.
Here is our ready
bunny!
I sincerely hope
what did you get
pleasure and
incocesl-sta and from the result.
