Difficulty – medium.
Necessary materials
1. “Ooise” bandage: yellow (No. 761) – 2 pieces, brown (No. 775) – 1 piece, light yellow (No. 783) – 1 piece, a little pink (No. 750). Or its counterparts.
2. Incyazha varpAgі ‘^eapz RSH8’: black (No. 53).
3. Hook – 4.0 or the one you usually knit from this knit.
4. White felt.
5. Filler.
6. Eyes on a secure mount, diameter 20 mm.
7. Oval nose on a secure mount, diameters 20*15 mm.
The growth of the finished toy turned out to be approximately 50 cm.
Notation
magic ring – amigurumi ring ch – air loop sc – single crochet inc – incibavmagic ring
dec – decаmagic ring
Head
We knit in yellow:
1 row: 6 sc in magic ring
2nd row: 6 inc (12)
3 row: 12 inc (24)
4 row: (3 sc, inc) * 6 (30)
5 row: (4 sc, inc) * 6 (36)
6 row: (5 sc, inc) * 6 (42)
7 row: (6 sc, inc) * 6 (48)
8 row: (7 sc, inc) * 6 (54)
9 row: (8 sc, inc) * 6 (60)
10 row: (9 sc, inc) * 6 (66)
11 row: (10 sc, inc) * 6 (72)
12 row: (11 sc, inc) * 6 (78)
13 row: (12 sc, inc) * 6 (84)
14 row: (13 sc, inc) * 6 (90)
15-19 rows: 90 sc (5 rows)
20 row: (13 sc, dec) * 6 (84)
21 row: (12 sc, dec) * 6 (78)
22 row: (11 sc, dec) * 6 (72)
23 row: (10 sc, dec) * 6 (66)
24 row: (9 sc, dec) * 6 (60)
25 row: (8 sc, dec) * 6 (54)
26 row: (7 sc, dec) * 6 (48)
27 row: (6 sc, dec) * 6 (42)
28 row: (5 sc, dec) * 6 (36)
29 row: (4 sc, dec) * 6 (30)
Start stuffing your head. The part must be completely stuffed.
30 row: (3 sc, dec) * 6 (24)
31 row: (2 sc, dec) * 6 (18)
32 row: (1 sc, dec) * 6 (12)
33 row: 6 dec
Cut the thread, fasten.
Mane
We knit in brown. Do not stuff the part.
It is necessary to connect 18 parts.
1 row: Dial 9 ch. From 2 loops: 8 sc, ch, turn.
2 row: dec, 4 sc, dec, ch, turn.
3rd row: dec, 2 sc, dec, ch, turn.
4th row: 2 dec, ch, turn.
5th row: dec.
Cut the thread, fasten.
After the magic ring is connected 18 parts, we will connect them.
To do this: take 2 triangular magic rings, tie them together. In the upper corner, knit 3 sc in one loop.
Don’t cut the thread after the magic ring, the two sides are tied. Immediately begin to tie the next triangle.
İncish the mane in the 17th row of the head.
Important! The mane is not incised along the entire diameter of the head, it is necessary to leave a place for attaching the body. The mane needs to be incised tighter.
Muzzlemagic ring
Knit in light yellow. We do not fill the detail.
First detail:
1 row: 6 sc in magic ring
2nd row: 6 inc (12)
3 row: 12 sc.
Cut the thread, fasten.
Second detail:
1 row: 6 sc in magic ring
2nd row: 6 inc (12)
3 row: 12 sc.
We do not cut the thread, we continue knitting further:
4th row: 6 sc x 2, 12 sc x 1, 6 sc x 2 (24)
5 row: 24 sc
6 row: (2 sc, dec) * 6 (18)
7 row: (1 sc, dec) * 6 (12)
8 row: 6 dec
Cut the thread, fasten. If you incise with the same thread, then leave a long tip.
Where
You need 2 identical parts: pink and light yellow. We do not fill the detail.
Pink detail:
1st row: cast on 4 ch.
From 2 loops: inc, 1 sc, 4 sc in 1 loop, 1 sc, inc. (10)
Cut the thread and fasten off.
yellow detail:
1st row: cast on 4 ch.
From 2 loops: inc, 1 sc, 4 sc in 1 loop, 1 sc, inc. (10)
We do not cut the thread, we continue knitting. İnc put 2 parts wrong sides to each other:
2nd row: 2 inc, 1 sc, 4 inc, 1 sc, 2 inc.
Cut the thread, fasten. If you incise with the same thread, leave a long tip.
Ears (2 pcs)
Looks like a mane, but you need to knit 2 yellow and 2 pink details. We do not fill the detail.
Detail:
1 row: Dial 9 ch. From 2 loops: 8 sc, ch, turn.
2 row: dec, 4 sc, dec, ch, turn.
3rd row: dec, 2 sc, dec, ch, turn.
4th row: 2 dec, ch, turn.
5th row: dec.
Cut the thread, fasten.
Fold the pink and yellow pieces wrong sides together. Tie around the perimeter with yellow thread. In the upper corner, knit 3 sc in one loop.
İnco knit 2 sides. Cut the thread, fasten. If you incise with the same thread, then leave a long tip.
Nose
If there is no magic ring ready to wear, you can knit it. The item can be stuffed with inc and incission.
We knit black cotton incyazhey:
1 row: 5 ch. From 2 loops: inc, 2 sc, 4 sc in 1 loop, 2 sc, inc. (12)
2nd row: 2 inc, 2 sc, 4 inc, 2 sc, 2 inc (20)
Cut the thread, fasten. If you incise with the same thread, then leave a long tip.
If desired, you can embroider a highlight with a white thread.
Head decoration
1. From a black cotton knit, cast on a chain of air loops. I got it: 140 ch. İncishit in the center of the head. The center of the head is the center of the 5th tip of the mane.
If you don’t want to dial a chain, then you can incо make a line from n go.
2. Place the muzzle to the head, the upper part of the muzzle is approximately 2-3 rows of the head. Secure the muzzle with needle magic rings, but do not incise!
3. İnc put where under the muzzle, inc fasten with a needle. Don’t incise.
4. Decrease the muzzle, incish where. I incised only the upper part.
5. After that, the magic ring where to incish, again incise the muzzle and incise it.
It should turn out roughly like this.
6. İncish ears between 3-4 and 6-7 points of the mane.
7. Glue the nose and eyes.
Used eyes and nose on a secure mount. But it is difficult to incicle them: thanks to the remaining leg, the part can pop out and peel off. So I sawed off the leg to get a flat piece.
She was inclined to the head and looked a good location.
After that, the magic ring found him – incicle.
Hands (2 pcs)
Start in light yellow:
1 row: 6 sc in magic ring
2nd row: 6 inc (12)
3 row: 12 inc (24)
4 row: (3 sc, inc) * 6 (30)
5 row: 30 sc behind the back wall
Change color to yellow.
6-7 rows: 30 sc (2 rows)
8 row: (8 sc, dec) * 3 (27)
9 row: 27 sc
10 row: (7 sc, dec) * 3 (24)
11 row: 24 sc
12 row: (6 sc, dec) * 3 (21)
13 row: 21 sc
14 row: (5 sc, dec) * 3 (18)
15 – 16 rows: 18 sc (2 rows)
17 row: (4 sc, dec) * 3 (15)
18-19 rows: 15 sc (2 rows)
20 row: (3 sc, dec) * 3 (12)
21-22 row: 12 sc (2 rows)
Fill your hands in approximately 1/3: plump at the bottom, then weakly.
Fold in half, inc knit 6 sc.
Cut the thread, fasten.
Legs (2 pcs)
Start in light yellow:
1 row: 6 sc in magic ring
2nd row: 6 inc (12)
3 row: 12 inc (24)
4 row: (3 sc, inc) * 6 (30)
5 row: (4 sc, inc) * 6 (36)
6 row: 36 sc behind the back wall of the loop.
Change color to yellow.
7 – 8 rows: 36 sc (2 rows)
9 row: (10 sc, dec) * 3 (33)
10 row: 33 sc
11 row: (9 sc, dec) * 3 (30)
12 row: 30 sc
13 row: (8 sc, dec) * 3 (27)
14 row: 27 sc
15 row: (7 sc, dec) * 3 (24)
16 – 18 rows: 24 sc (3 rows)
19 row: (6 sc, dec) * 3 (21)
20 – 22 rows: 21 sc (3 rows)
23 row: (5 sc, dec) * 3 (18)
24 row: 18 sc
25 row: (4 sc, dec) * 3 (15)
26 row: 15 inc (30)
27 row: (4 sc, inc) * 6 (36) Fully fill the legs.
Cut the thread, fasten.
Tail
We knit in yellow, we do not stuff the part:
1 row: 6 sc in magic ring
2 row: 6 sc
İnc continue to knit 6 sc magic ring tail will not be 20 cm long. At the tip of the tail, make loops of dark brown incyazhi.
Body
We knit in yellow, stuff the detail as we knit:
1 row: 6 ch. From 2 loops: inc, 3 sc, 4 sc in 1 loop, 3 sc, inc (14)
2nd row: 2 inc, 3 sc, 4 inc, 3 sc, 2 inc (22)
3 row: 2 sc on the body, 7 sc with the leg, 4 sc, 7 sc with the leg, 2 sc (22)
4 row: 2 inc, 29 sc on the remaining leg, 4 inc, 29 sc on the remaining leg, 2 inc (74)
5 row: (16 sc, inc) * 4, 6 sc (78)
6 row: (12 sc, inc) * 6 (84)
7-9 rows: 84 sc (3 rows)
10 row: (12 sc, dec) * 6 (78)
11 row: 78 sc
12 row: (11 sc, dec) * 6 (72)
13 row: 72 sc
14 row: (10 sc, dec) * 6 (66)
15 row: 66 sc
16 row: (9 sc, dec) * 6 (60)
17 row: 60 sc
18 row: (8 sc, dec) * 6 (54)
19-20 rows: 54 sc (2 rows)
21 row: (7 sc, dec) * 6 (48)
22-23 rows: 48 sc (2 rows)
24 row: (6 sc, dec) * 6 (42)
25-27 rows: 42 sc (3 rows)
28 row: (5 sc, dec) * 6 (36)
29 row: 36 sc
30 row: We will knit our hands, see that they run parallel to each other. 9 sc, 6 sc with arm, 12 sc, 6 sc with arm, 3 sc (36)
31 row: 36 sc
Cut the thread, fasten. If you incise the body to the head with the same thread, then leave a long tip.
Buttonsmagic ring
We knit light yellow:
1 row: 6 sc in magic ring
2nd row: 6 inc (12)
3 row: 12 inc (24)
Cut the thread, fasten. If you incise with the same thread, then leave a long tip.
With black cotton thread, embroider 2 parallel stripes that imitate the incising of a button.
Or you can use a ready-made button of a suitable color, diameter 50 mm.
Collecting the magic ring
1. İncish button
2. İncish the tail between the 6th and 7th rows of the body.
3. Next, we will make black stripes on the body, magic ring to magic ring, but in the figure:
You will need several pieces of black thread: 2 for the arms, 2 for the legs and 2 for the body. From a black cotton knit, you can pick up a chain of air loops or cut off a piece of thread of a suitable length.
I made chain magic rings from air loops, inc put them to the body and looked for enough or not, so the number of loops is not counted.
Body: The thread inc comes incimerously from the middle of the leg to % of the head.
Hands: The thread inc goes from one edge of the fold to the other, incising behind the fingers.
Legs: The thread divides the leg in half, extending behind the toes.
4. Cut out a row of triangles from white felt and sew them onto the arms and legs. This is what a row of triangles looks like:
For legs: length 12 cm, height 2-3 cm, for arms – 10 cm and height 2-3 cm. Sew between black threadmagic rings in the 5th row for the arms and in the 6th row for the legs.