Necessary materials:
^ incyazh “Kuzya Kldecochkin” (95 m / 50 g) – 1 skein;
^ incyazh Iris Satta (82 m / 10 g) or other thin incyazh in the color of incyazh “Kuzya Kldecochkin” – 1 skein;
^ hook C1oyer No. 1.5 (choose according to the thickness of the incyazhi);
^ filler (sintepuh);
^ glass eyes on a loop 3 mm or beads – 2 pcs;
^ black thread for the spout;
^ bobbin thread in the color of knitting, for incising the muzzle and ears;
^ brown thread for embroidering the nose;
^ for head mounting: 2 discs 12 mm and 9 mm, 1 T-pin 18 mm; for attaching the upper legs: 4 discs 6 mm, 2 T-pins 18 mm; for attaching the lower paws: 4 discs 6 mm, 2 T-pins 18 mm.
^ Round Decians;
^ manicure scissors for cutting;
With the use of these materials, you will get a bear with a height of 8-9 cm. The consumption of incyazhi is small.
Legend:
ch – air loop;
sc – single crochet;
inc – inc bonus;
dec – dec.
Preparing for knitting
İncyazha “Kuzya Kldecochkin” consists of three twisted threads. We will knit the bear in one thread, so it is necessary to divide the hank into three, one thread each.
We connect the thread of incyazhi “Kuzi Kldecochkin” and the thread of incyazhi Iris “Satta” and start knitting.
In this master class, knitting is used with the wrong side out.
When knitting an amigurumi toy with the wrong side out, you move in a circle in counterclockwise direction. This method is great for textured toys, because. all the “fluffiness” of incyazhi turns out to be on the wrong side.
Tips for knitting textured incs:
1. Mark the beginning of each row with a marker.
2. İnci knitting each row, count the loops.
3. If the loops are not visible, then knit “by touch”, i.e. from the last inc loop, crochet inc, and he himself will fall into the adjacent hole.
4. If you are a beginner, then first try out on a less fuzzy incage. Do not choose too dark incyazhu, because. She is much more difficult to knit.
Head
1 row. 6 sc in an amigurumi ring
2 row. 6 inc (12)
3 row. (1 sc, inc) x 6 times (18)
4 row. (2 sc, inc) x 6 times (24)
5 row. (3 sc, inc) x 6 times (30)
6-11 rows. 30 sc (6 rows)
12 row. (3 sc, dec) x 6 times (24)
13 row. (2 sc, dec) x 6 times (18)
14 row. (1 sc, dec) x 6 times (12)
We stuff our heads.
We take a 12 mm disc and a T-shaped cotter pin. We make a mount.
We insert the cotter pin into the hole.
15 row. Dec 6
We tighten the hole. Cut the thread, fasten and inc
details.
We take manicure scissors and make a neat haircut of the head.
muzzle
We knit a chain of 6 ch
1 row. from the second loop 4 sc, 3sc in 1 stitch, inc continue to knit on the other side of 3 sc, inc (12)
2 row. 12 sc
We fasten the thread and cut it off.
We take manicure scissors and make a neat haircut of the muzzle.
Ears (2 parts)
We knit in one thread “Kuzi Kldecochkin”, without an additional thread!
1 row. 6 sc into an amigurumi ring 1 CH turn knitting
2 row. 6 sc
We cut the threads, fasten them and leave them, then we put them in the head. We do a neat haircut of the ears.
Assembly and design of the head
Using a sewing pin, we attach the muzzle to the head.
The location of the muzzle can be chosen at your discretion. I
I place it at the very bottom of my head.
We sew the muzzle with a needle and bobbin thread, moving in a circle. At the end of incishing, add a little bit to the muzzle
filler.
We take a thread of brown color and a needle. We embroider a nose.
We take eyes (or beads), a needle and incochny thread. First we measure inc
eyes and find places for their attachment.
We insert the needle at the bottom of the head, behind (point 1), and withdraw it at point 1
eyes (point 2). We put the needle into a loop (or into a bead).
We insert the needle at the same point 2 (if you have beads for the eyes, it is better to retreat 1 loop from point 2) and output at the starting point 1. We retreat from point 1 one loop and insert the needle at point 3, and output in the area of the second eye (point 4). We do the same procedure as with the first eye, we bring the needle out at the bottom of the head (point 3) A little thread
pull, tie in a knot and incyachem inside the head.
We attach the ears to the head. The threads that we left inc and knitting the ears, inc we put inside the head with a hook. We bring them out behind the head. After incising the ears, these threads must be cut.
We embroider eyebrows.
upper paws
1 row. 6 sc in an amigurumi ring
2 row. (inc, 2 sc) x 2 times (8)
3-9 rows. 8 sc (7 rows)
We fill the foot with filler quite a bit.
We take a 6 mm disc and a T-shaped cotter pin. We make a mount.
We insert the cotter pin into the hole between the 8th and 9th rows.
10 row. Dec 4
We tighten the hole. Cut the thread, fasten and inc
details.
We make a neat haircut of the paw.
We knit the second paw in the same way as the first.
Lower legs
We knit a chain of 4 ch
1 row. from the second loop 2 sc, 3sc in 1 p, inc continue to knit on the other side 1 sc, inc (8)
2 row. inc, 1 sc, 3 inc, 1 sc, 2 inc (14)
3 row. 14 sc
4 row. 3 sc, 4 dec, 3 sc (10) 5 row. 3 sc, 2 dec, 3 sc (8)
6-9 rows. 8 sc (4 rows)
If desired, you can add 1-2 more rows if the paw seems short to you.
We fill the paw with filler.
We take a 6 mm disc and a T-shaped cotter pin. We make a mount.
We insert the cotter pin into the hole between the 8th and 9th rows.
10 row. Dec 4
We tighten the hole. Cut the thread, fasten and inc
details.
We make a neat haircut of the paw.
We knit the second paw in the same way as the first, only splint
fastening is inserted from the opposite side.
Body and Assembly
1 row. 6 sc in an amigurumi ring
2 row. 6 inc (12)
3 row. 12 sc
4 row. (1 sc, inc) x 6 times (18)
5 row. 18 sc
We take the head, a 9 mm disc and round decks. We fasten the head to the connected part. We insert the split pin in the middle so that the marker is at the back. We put the disc on the cotter pin. With the help of rounddects, we twist the ends of the cotter pin so that the head and the connected part are tightly attached to each other.
We will do the haircut of the body in the course of knitting.
6 row. 18 sc
7 row. (2 sc, inc) x 6 times (24)
8 row. (3 sc, inc) x 6 times (30)
We take 2 disks of 9 mm and round decks. We fasten the upper paws on the sides of the body between 4 and 5 rows.
9-12 rows. 30 sc (4 rows)
13 row. (3 sc, dec) x 6 times (24)
We take 2 disks of 9 mm and round decks. Fasten the lower paws on the sides
bodies between 11 and 12 rows.
14 row. (2 sc, dec) x 6 times (18)
15 row. 18 sc
We fill the body with filler.
16 row. (1 sc, dec) x 6 times (12)
17 row. Dec 6
We tighten the hole. We cut the thread, fasten it and insert it inside the part.
Tail
1 row. 6 sc in an amigurumi ring
We tie the ends of the thread into a knot, then we cinc them inside the inci body
incising the tail.
İncishivaem ponytail with bobbin thread in the color of incyazhi.
Hat + scarf
For knitting a hat and scarf, you can use Iris PMK named after Kirov, woolen floss “Rainbow” in two threads or any other thin threads, colors red and white.
Beanie
We knit with a red thread.
1 row. 6 sc in an amigurumi ring
You can knit behind the back walls of the loops, the hat will be slightly longer and with a pattern.
2 row. (inc, 1 sc) x 3 times (9)
3 row. 9 sc
4 row. (inc, 2 sc) x 3 times (12)
5 row. 12 sc
6 row. (inc, 3 sc) x 3 times (15)
7 row. 15 sc
8 row. (inc, 4 sc) x 3 times (18)
9 row. 18 sc
10 row. (inc, 5 sc) x 3 times (21)
11 row. 21 sc
12 row. (inc, 6 sc) x 3 times (24)
13 row. 24 sc
14 row. (inc, 3 sc) x 6 times (30)
15 row. 30 sc
16 row. (inc, 4 sc) x 6 times (36)
17 row. 36 sc
18 row. (inc, 5 sc) x 6 times (42)
19 row. 42 sc
20 row. (inc, 6 sc) x 6 times (48)
21 row. 48 sc
Change the thread to white.
22-26 rows. 48 sc 5 rows
We fasten the thread, cut it.
pom pom for hat
We wind a white thread on two fingers (in my case, a woolen floss Rainbow). We remove the skein from the fingers and in the middle
tie it tightly with thread.
Next, we cut the pompom, a lot and carefully.
İnco we put the threads of the pom-pom (with which we tied it) on the top of the head into the adjacent holes inside the cap. Tie inside on
node.
Scarf
We knit with white thread.
1 row. 6 sc in an amigurumi ring
2 row. (inc, 1 sc) x 3 times (9)
3 row. 9 sc
* Change the thread to red.
We knit 4 rows of 9 sc.
Next, change the thread.
We knit 2 rows of 9 sat. *
We knit from * to * until the length of the scarf is 11 cm
We collect a chain of 15 CH. We knit further sc into the next loop. We’ve got a loop. İnco continue to knit a scarf alternating the same pattern. We finish on a white thread.
By inserting the end of the scarf into the loop, you fix the scarf.
