SYMBOLS
MAGİC RİNG – amigurumi ring
sc – single crochet
HDC – half double crochet
inc – incibavmagic ring
dec – decаmagic ring
ch – air loop
(… sc) – the total number of columns in the row
sl-st – connecting post
Note! Knitting toys goes in a circle,
without air lifting loops (new row
starts immediately with incotying columns without
nakida). If an air lifting loop is required,
I’m magic ring.
REQUIRED MATERIALS AND TOOLS
1) İncyazha for camel magic ring
YarnArt JEANS: (07) – beige (main body color)
Alize Cotton Gold: (493) – brown (claws, tassels, magic ring on ponytail)
Accessories for accessories
Alize Cotton Gold: (493) – brown (magic ring around the neck);
YarnArt JEANS: (90) – red (reins, saddle); (33) – golden (saddle);
(62/01) – white (cap magic ring); (35/88) – yellow (pompom on a hat)
İncyazha for brushes
YarnArt JEANS: (90) – red; (33) – golden; (35/88) – yellow
Alize Cotton Gold: (126) – green
3) Black magic ring thread for embroidery of the upper eyelids
4) Threads for embroidery wear magic ring. I used Alize Cotton thread
Gold (493) – brown. The sl-st barked into separate thin threads.
5) Eyelets on a 8.0 mm safety mount. If you are using a hook
other size, then choose the size of the peephole yourself.
6) Holofiber
7) Regular needle
8) Basting pins
9) Scissors
DESCRIPTION
Ears (2 parts):
We start knitting with a thread of the main color (07).
1) MAGİC RİNG, 6 sc
2) 6 sc
3) (1 sc, inc)*3 (9 sc)
4) 1 sc, inc, (2 sc, inc)*2, 1 sc (12 sc)
5) 12 sc
6) (1 sc, dec)*4 (8 sc)
In the next loop we knit sl-st, cut off the thread, leaving the tip for
Inc. We insert this tip into the needle, fold the eye
in half and inc stitch with several magic ring stitches.
We start knitting with a thread of the main color (07). Stuff your head
holofiber in the course of knitting.
1) MAGİC RİNG, 7 sc
2) 7 inc (14 sc)
3) (1 sc, inc)*7 (21 sc)
4) 1 sc, inc, (2 sc, inc)*6, 1 sc (28 sc)
5-7) 28 sc (3 rows)
8) 1 sc, dec, (2 sc, dec)*6, 1 sc (21 sc)
9) 3 sc, inc, (6 sc, inc)*2, 3 sc (24 sc)
10) 9 sc, 6 inc, 9 sc (30 sc)
11) 9 sc, (1 sc, inc)*3, (inc, 1 sc)*3, 9 sc (36 sc)
12-13) 36 sc (2 rows)
14) 3 sc, inc, (5 sc, inc)*5, 2 sc (42 sc)
15) 42 sc
16) 3 sc, inc, (6 sc, inc)*5, 3 sc (48 sc)
17-18) 48 sc (2 rows)
At this stage, we will insert the eyes. See photos on the next page.
Head:
19) 3 sc, dec, (6 sc, dec)*5, 3 sc (42 sc)
20) 42 sc
21) (5 sc, dec)*6 (36 sc)
22) 36 sc
23) 2 sc, dec, (4 sc, dec)*5, 2 sc (30 sc)
24) (3 sc, dec)*6 (24 sc)
25) 1 sc, dec, (2 sc, dec)*5, 1 sc (18 sc)
26) (1 sc, dec)*6 (12 sc)
27) 6 dec
In the next loop we knit sl-st, cut the thread, tighten the ring and
inc thread.
İncishivat ears on 19-20 rows,
distance between ear magic rings 12-14 sc.
We embroider with a thin black thread the upper
eyelids.
We embroider a nose. I’m spreading inc
Alize Cotton Gold (493)-brown
color, consisting of 4 threads, and take
there are only 2 threads.
Head shaping:
The top points are between 4 and 5 side by side. Space between
point magic rings 4-5 sc. The third dot of the magic ring is 2 rows down in the center.
The fourth point of the magic ring is located in the center of MAGİC RİNG.
Claws (8 pcs):
We start knitting with a brown thread (493).
1) MAGİC RİNG, 4 sc
2) 4 inc (8 sc)
In the next loop we knit sl-st, 1 ch, cut the thread, the tip is not
leave. We bend the part, incide the shape of the claw magic ring (photo of the claws
forgot to do).
Legs (4 pcs):
We start knitting with a thread of the main color (07). Stuff your leg
holofiber in the course of knitting.
1 item:
1) MAGİC RİNG, 6 sc
2) 6 inc (12 sc)
In the next loop we knit sl-st,
1 ch, cut the thread, tip
We do not leave.
2 detail:
1) MAGİC RİNG, 6 sc
2) 6 inc (12 sc)
We do not cut the thread. We put the second part in front of us.
We fold 2 parts wrong sides to each other,
inc we continue knitting, tying inc and this both parts.
3) (1 sc, inc)*6 (18 sc)
We put a marker
4) !!!Important!!! In this row we will knit claws. We knit all loops for
the back walls of the loop, we knit the claws behind both walls of the loop. In this,
we will capture the loops on the claws only on one side. AT
the next row we will capture the rest.
5 sc, (tie claws on the back side of 4 sc), (tie claws on
back side 4 sc), 5 sc (18 sc)
5) !!!Important!!! In this row we will inc continue to tie in claws, and that’s all
we knit the loops already for both walls of the loop.
5 sc, (we knit claws on the front side of 4 sc), (we knit eat claws
front side 4 sc), 5 sc (18 sc)
6) 18 sc
7) 5 sc, 4 dec, 5 sc (14 sc)
8-17) 14 sc (10 rows)
In the next loop we knit sl-st, 1
ch, cut the thread, the tip is not
leave.
We start knitting with a thread of the main color (07). Stuff your body
holofiber in the course of knitting. Pay special attention to the magic ring knife and
hump on the back. Get stuffing done on time.
1) 6 ch, start knitting from the 2nd loop from the magic ring hook.
4 sc, 3 sc in last st, 3 sc in reverse
side, inc in the last loop (12 sc)
2) inc, 3 sc, 3 inc, 3 sc, 2 inc (18 sc)
3) 1 sc, inc, 3 sc, (1 sc, inc)*3, 3 sc, (1 sc, inc)*2 (24 sc)
4) 2 sc, inc, 3 sc, (2 sc, inc)*3, 3 sc, (2 sc, inc)*2 (30 sc)
5) 3 sc, inc, 3 sc, (3 sc, inc)*3, 3 sc, (3 sc, inc)*2 (36 sc)
6) In this row we will tie the legs. Focus on the diagram
which is located on the next page.
We have 36 loops in a circle. Increasingly divide the loops so that
the legs were even, I will write a diagram, given my density
knitting. We will have 4 loops on the front and back of the body
toys. We leave 6 loops on the side parts. And 4 loops
we will knit the legs on the “corner” parts.
!!!IMPORTANT!!! The claws of the legs should look strictly inciamo. Technique
In addition, the magic ring can be incautiously rasl-st, you can read the loops and tie the legs
watch in the MK video on my magic ring on Yandex Zen in the 2nd part.
Body:
1 sc, (knit the leg, grabbing
4 sc), 6 sc, (we knit a leg,
capturing 4 sc), 4 sc, (we knit
leg, capturing 4 sc), 6 sc,
(we knit the leg, capturing 4 sc),
2 sc (36 sc).
1 sc I do not tie, I put
marker. Put a marker at the end
row in the middle, dividing 4 sc.
7) In this row, we will continue to knit the legs along the remaining
loops on the outside. Those loops that were tied into
in the last row, do not touch.
!!!IMPORTANT!!! The corner places of the legs before the 1st loop and after
last stitch, knit with demagic rings to avoid
holes were formed. This stage of work can be seen in
my magic ring on Yandex Zen in the 2nd part.
2 sc, (inc we knit the legs of 10 sc along the remaining loops), 6 sc,
(inc knit on the remaining loops of the legs 10 sc), 4 sc,
(inc knit on the remaining loops of the legs 10 sc), 6 sc,
(inc knit on the remaining loops of the legs 10 sc), 2 sc (60 sc)
8-15) 60 sc (8 rows)
16) Next, find 2 center loops on the front.
We count 11 loops in the magic ring each side (central loops
are also considered). You should get 22 loops, which we will leave
in front. For convenience, use markers.
Below in the diagram, I will write my number of loops, which I
it is necessary to inco-tie before and after these markers.
20 sc (to 1st marker), 10 ch, 18 sc (start in st
after 2nd marker) (48 sc)
17) 48 sc (along the air chain we knit for the upper
half loops.
Do not forget to fill with holofiber in knitting incosesl-ste, special
pay attention to the magic ring knife.
18) 2 sc, dec, (4 sc, dec)*7, 2 sc (40 sc)
19) 40 sc
20) (3 sc, dec)*8 (32 sc)
21) 32 sc
22) 1 sc, dec, (2 sc, dec)*7, 1 sc (24 sc)
23) 24 sc
24) (1 sc, dec)*8 (16 sc)
25) Dec 8
In the next loop we knit sl-st, cut the thread, tighten the ring and
inc the tip.
1) In knitting the first row on the neck, we focus on the diagram below.
Also, this stage of work can be viewed in the MK video on my
magic ring on Yandex Zen in the 2nd part.
We turn the toy in such a way that 10 ch, which we
knitted in the 16th row, located closer to us, and 22 loops on the neck
were from us.
We start counting sincava to the left. In the 5th half loop we knit 1 ch and
here 1 sc. Next, we knit 4 sc, dec (the last loop on the chain,
side loop on the body, 1st loop on the body of 22 loops), 20 sc,
dec (last st of 22 sts, side st on body, 1st st
on a chain of ch), 3 sc (30 sc)
We put a marker.
Neck:
2) Ch inc with magic ring, start knitting immediately from the 1st sc:
4 sc, dec, 5 sc, dec, 6 sc, dec, 5 sc, dec, 2 sc
+ 1 offset column (26 sc)
3) 2 sc, dec, 18 sc, dec, 2 sc (24 sc)
4) 1 sc, dec, 18 sc, dec, 1 sc (22 sc)
5) Dec, 18 sc, dec (20 sc)
6-7) 20 sc (2 rows)
8) 9 sc, 2 dec, 7 sc (18 sc)
center of the front.
9-10) 18 sc (2 rows)
11) 7 sc, 5 HDC, 6 sc (18) – HDC must be strictly centered
along the front.
In the next loop we knit sl-st, cut the thread, leaving the tip for
Inc.
We start knitting with a thread of the main color (07).
We retreat from the edge of the thread 10-15 cm. We knit 10 ch, and from the 2nd loop from
crochet magic ring inc knit 9 sl-st, 1 ch, cut the thread, leaving the tip.
Making a ponytail brush
I cut Alize Cotton Gold Brown (493) into 3 pieces magic ring
10-15 cm. I split them into separate thin threads (4 each in magic ring). AT
as a result, I get 12 thin threads.
I insert the hook into the tip of the tail of the magic ring, grab all these threads and
I make a brush, cut it to the desired length. (photo on pages 19-20).
Tail:
We sew the head to the body. İncishivaem ponytail between 9 and 10 side by side,
if you count from MAGİC RİNG on the hump (I have an inc tail a little in
side).
Magic ring collection:
Accessories:
magic ring
We start knitting with a white thread (01/62).
1) MAGİC RİNG, 6 sc
2) 6 inc (12 sc)
Change color to golden (33)
3) (3 sc, inc)*3 (15 sc)
Change color to white (01/62)
4) (4 sc, inc)*3 (18 sc)
5) 18 sc
In the next loop we knit sl-st, cut the thread, leaving the tip for
Inc.
Pompon
We start knitting with a yellow thread (35/88)
1) MAGİC RİNG, 4 sc
2) 4 sc
In the next loop we knit sl-st, 1 ch, cut the thread, leaving the tip for
Inc.
We insert this tip into the needle and incise on the top of the cap.
Saddle
We start knitting with a red thread (90).
1) We retreat from the edge of 10-15 cm, we collect a chain of 8 ch, from the 2nd
loops from hookmagic ring knit 7 sc, 1 ch, turn (7 sc)
2-20) 7 sc, 1 ch, turn (19 rows)
21) 7 sc
We knit 1 ch, cut the thread, leaving a small tip.
Magic ring
Refer to the diagram and photo on the next page.
We put our canvas so that the tip that we have left in
end of knitting, located on the top left. İnc we fasten the thread in the first
extreme loop on your side. We knit 1 ch and here
inco knit 2 sc. Next knit: 5 sc, 3 sc in one loop, 20 sc
on the side, 3 sc in one loop, 5 sc, 3 sc in one loop, 20 sc
on the side, 1 sc in the 1st loop (from where knitting began). Ch
incopus magic ring and knit sl-st in the 1st sc (he is now the middle one).
Dial 27 ch, do sl-st in the middle sc with inc opposite
sides, 1 ch, cut the thread, incending the tip.
On the other hand inc we fasten the thread to the middle sc, we knit 27 ch,
do sl-st to middle sc on opposite side, 1 ch,
cut the thread, increase the tip.
Saddle brushes
One Incyadmagic ring for one brush consists of 4 thin threads
after splitting incyazh YarnArt JEANS and Alize Cotton Gold.
4 yellow brushes (35/88) – 2 on each side of the magic ring
2 red brushes (90) – 1 on each side of the magic ring
2 green tassels (126) – 1 on each side of the magic ring
We fasten the brushes through 1 sc, be guided by the diagram below and
photos on the next page.
Reins
We start knitting with a red thread (90). We retreat from the edge of 10-15 cm.
We collect a chain of 24 ch, we lock the magic ring into the sl-st ring. İncocontinue,
we cast on a chain of 29 ch and make sl-st in 12 loop on the ring, if
count to the left. We knit 1 ch, cut the thread, leaving
the end is longer.
We make tassels with incava and the left side of the reins, be guided
to the diagram below.
4 yellow brushes (35/88) – 2 on each side of the magic ring
2 gold tassels (33) – 1 on each side of the magic ring
2 green tassels (126) – 1 on each side of the magic ring
We put the reins on the head. Insert the long tip into the needle
which we left and 1-2 stitch magic rings fix 3 points (see photo on
next page). When you fix the third point, there
you can tie this tip into a knot with the first remaining thread, and
cinch them into the canvas.
Accessories for the neck
Cut the thread from the incyazh Alize Cotton Gold brown (493)
25-30 cm. We fasten 3 tassels in the middle: 2 yellow tassels (35/88);
1 golden tassel (33).
We put this rope around the neck and tie it in the back with a 2 magic ring knot.
You need this rope magic ring to sit a little loose.
We insert one of the tips into the needle and on the back of the neck a little
we incise, after which we incise the threads.
Finishing touches
İncishivaem cap on the head of the camelmagic ring between the earsmagic rings.
Congratulations, your magic ring toy is ready!
I would be very pleased if you share your
finished work and leave your feedback about this Master-Klasl-ste