List of required materials:
1. Himalaya dolphin baby dark gray (320) – suitable
any shade of gray (incination consumption, magic ring crochet, 1.5 mmagic ring)
2. Himalaya dolphin baby white (muzzlemagic ring)
3. YarnArt Jeans. Gold (1 skein) and white color – scarf and
cap. Gray – patches.
4. Hook number 3.75 mm for a toy
5. Hook 2.75 mm for magic ring scarf and magic ring cap
6. Filler (Sintepon, etc.)
7. Joint for toys – 25 (Arms – legs) – 4 pcs., 40 mm – 1 pc.
(neck)
8. Needle and thread for incision. Black sewing threads for
registration
9. Eyes on a secure mount (9-10 mm)
10. Decorative scarf buttonmagic ring (optional)
Choose the size of the eyes in proportion to the size of your toy.
The size of the toy will depend on the density of your knitting chosen
incs and hook numbersmagic ring.
Toy size (inci and crochet number 3.75 – 29 cm
Legend:
MAGİC RING – amigurumi ring
sc – single crochet
dc – double crochet
pdc – half double crochet
ch-air loop
(1) – number of loops
inc – incibavmagic ring
dec – decаmagic ring
PP – lifting loop
1st row
SL-ST-connecting post
See – watch
* – demolishmagic ring for additional tips
Pens:
*The marker goes straight in front of the handle, perpendicular to the top
1. 6 sc in MAGİC RING (6)
2.6 inc (12)
3. (1 sc, inc) * 6 (18)
4. (2 sc, inc) * 6 (24)
5. – 8. 24 sc (24)
Stuffing the handles as you knit
9. 18 sc, 3 dec (21)
10. 3 dec, 9 sc, 3 dec (15)
11. 3 dec, 9 sc (12)
12. – 19. 12 sc (12)
*İnc when using the joints of the handle, we stuff it as tightly as possible
20. 6 dec (6)
We insert the joint between 17-18 rows. Knifemagic ring screw comes out
the inside of the handle (See photo)
**If the handles get tangled, only stuff the beginning tightly
handles, after the 19th row inc we knit for both parts of knitting 6 sc
Legs:
*Marker goes in front
1. 6 sc in MAGİC RING (6)
2.6 inc (12)
3. (1 sc, inc) * 6 (18)
4. (2 sc, inc) * 6 (24)
5. (3 sc, inc) * 6 (30)
6. – 8. 30 sc (30)
*İnc and using joints as we knit, we stuff the legs
as tight as possible
We insert the joint between 19-20 rows. Knifemagic ring cotter pin comes out on
the inside of the toy’s leg.
**If the legs get stuck, only stuff the beginning tightly
legs, after 21 rows inc we knit for both parts of knitting 6 sc
9. 24 sc, 3 dec (27)
10. 3 dec, 21 sc (24)
11. 18 sc, 3 dec (21)
12. 3 dec, 15 sc (18)
13. – 20. 18 sc (18)
21. (1 sc, dec) * 6 (12)
22. 6 dec (6)
Cut the thread, leaving a long tip. Pull the remaining loops off
using a needle and remaining magic ring thread
Body:
*The marker goes straight from the back, perpendicular to the top, if necessary
inc work another 1-2 sc and align the beginning of the row (offset loop)
1. 6 sc in MAGİC RING (6)
2.6 inc (12)
3. (1 sc, inc) * 6 (18)
4. (2 sc, inc) * 6 (24)
5. (3 sc, inc) * 6 (30)
6. (4 sc, inc) * 6 (36)
7. (5 sc, inc) * 6 (42)
8. (6 sc, inc)* 6 (48)
9. – 14. 48 sc (48) – For tying legs, see **
We insert the legs between 11 – 12 rows (trust in the magic ring in the row there will be
The legs of your toy will look better). We secure the joint.
The tip of the joint stem can be melted using a lighter and a slightly magic ring
inc flatten for more secure fastening.
**If the legs get stuck, then make sure that the marker goes
along the body exactly behind, in the middle of the back, without displacement. If needed,
inc, knit another 1-2 sc and rearrange the marker. AND
For the legs in the 11-12th row – 10 sc, 6 sc (we knit the leg), 16 sc, 6 sc
(we tie in the leg), 10sc (48)
15. 18 sc, 6 dec, 18 sc (42) – See *****
16. (5 sc, dec) * 6 (36)
17. – 18. 36 sc (36)
19. (4 sc, dec) * 6 (30)
20. – 24. 30 sc (30) For tying handles, see ***
We insert the handles between 21 – 22 rows (trust in the magic ring, there will be
The legs of your toy will look better). We secure the joint.
The tip of the joint stem can be melted using a lighter and lightly
inc flatten for more secure fastening
***If the handles get knitted: In the 21-23rd row inc we knit 5sc, 6
sc (we tie in a handle), 8sc, 6 sc (we tie in a handle), 5sc (24)
25. (3 sc, dec) * 6 (24)
****If you tie your head in. Start after this row. Scheme
heads from row 5 and further according to the pattern. But then don’t forget that the eyes
insert at 14-15. In the same way (without using joints) the head can be
incishit
26. (2 sc, dec) * 6 (18)
27. (1 sc, dec) * 6 (12)
We stuff it as tightly as possible and insert the joint. We knit necklaces up to
end, the magic ring will not close the base of the joint
*****To tie the bear (In a dress or skirt) after the 15th row
change body color to clothing color, inc knit:
16. 36 sc (36)
17. 36 sc for the back half loop (36)
Further according to the scheme. To knit a skirt in the 17th row we knit for
front wall 3 pdc in one loop. Another row of pdc. We tie it
incousty sc one more row.
Head:
1. 6 sc in MAGİC RING (6)
2.6 inc (12)
3. (1 sc, inc) * 6 (18)
4. (2 sc, inc) * 6 (24)
5. (3 sc, inc) * 6 (30)
6. (4 sc, inc) * 6 (36)
7. (5 sc, inc) * 6 (42)
8. (6 sc, inc) * 6 (48)
9. (7 sc, inc) * 6 (54)
We place the head on the leg of the joint, in the very center of the knitting,
slam it shut. Stuff as you knit, more tightly
*İnc when using a joint, or knitting, the beginning of the row comes from the bottom
heads. In case of incision it is the other way around. Therefore, you need to carefully monitor
magic ring insert eyes in a row.
10. – 17. 54 sc (54)
We insert the eyes in the 11th-12th row (between the eyes of the magic ring and the distance is 1
column). If the head is incised, insert the eyes approximately 14-
Row 15 (start of row from top)
18. (7 sc, dec) * 6 (48)
19. (6 sc, dec) * 6 (42)
20. (5 sc, dec) * 6 (36)
21. (4 sc, dec) * 6 (30)
22. (3 sc, dec) * 6 (24)
23. (2 sc, dec) * 6 (18)
24. (1 sc, dec) * 6 (12)
25. 6 dec (6)
Cut the thread, leaving a long tip. Pull the remaining loops off
using a needle and remaining magic ring thread.
Muzzlemagic ring:
White
1. 6 sc in MAGİC RING (6)
2.6 inc (12)
3. (1 sc, inc) * 6 (18)
4. (2 sc, inc) * 6 (24)
*to make the muzzle of the magic ring voluminous, knit another row 24 sc and
fill with filler inc and stitch to the head
We embroider the nose on the muzzle using the same ink as the cap.
Using regular magic ring stitches from bottom to top or vice versa, in several layers for
volume.
For convenience, first embroider two stripes to know the magic ring
the size will be your nose. You shouldn’t embroider too big.
Ears, tail:
1. 6 sc in MAGİC RING (6)
2.6 inc (12)
3. – 4. 12 sc (12)
Fold and tie on both sides
knitting 6 sc.
*No need to stuff
Patches:
1. 8 sc in MAGİC RING (8)
We knit (3 sc in 1 loop, 1 sc) * 4, then we knit a square, in the corners
inc tying 3 sc
Choose the size of the patch according to the size of your toy
Cap:
*We knit the pompom separately
Golden
1. 6 sc in MAGİC RING (6)
2.6 inc (12)
3. – 5. 12 sc (12)
6. (1 sc, inc) * 6 (18)
7. – 9. 18 sc (18)
10. (2 sc, inc) * 6 (24)
11. – 13. 24 sc (24)
14. (3 sc, inc) * 6 (30)
15. – 17. 30 sc (30)
18. (4 sc, inc) * 6 (36)
19. – 21. 36 sc (36)
22. (5 sc, inc) * 6 (42)
23. – 25. 42 sc (42)
26. (6 sc, inc) * 6 (48)
27. – 29. 48 sc (48)
30. (7 sc, inc) * 6 (54)
31. – 33. 54 sc (54)
34. (8 sc, inc) * 6 (60)
35. – 37. 60 sc (60)
38. (9 sc, inc) * 6 (66)
39. – 41. 66 (66)
42. (10 sc, inc) * 6 (72)
43. 72 sc (72)
White
44. 72 sc (72)
Golden
45.72sc
Pompon:
White
1. 6 sc in MAGİC RING (6)
2.6 inc (12)
3. (1 sc, inc) * 6 (18)
4. (2 sc, inc) * 6 (24)
5. (3 sc, inc) * 6 (30)
6. – 9. 30 sc (30)
7. (3 sc, dec) * 6 (24)
8. (2 sc, dec) * 6 (18)
Fill with filler and sew the magic ring cap to the tip
Scarf:
For the magic ring scarf, cast on a chain of 60 CH, and starting from the second loop from
magic ring hook we knit several (3-5) rows in rotating rows. Next rows
let’s start with pp
*Choose the length of the scarf according to the size of your toy. The more
magic ring chain from CH – the longer the scarf
Collection of magic ring:
We sew the muzzle under the very eyes with magic rings (do not stuff it). Ears
incise between rows 16-22 of the head (beginning of the row from the bottom). Tail
We incise approximately between 8-10 rows of the body.
We embroider stitches on the forehead, tummy, and on the magic rings of the arms and legs. For
To do this, we take black sewing threads of 4-6 threads. Threads too thick
I don’t recommend taking it.
We sew the cap on the side of the head. We add a decorative pattern to the scarf
button
Congratulations!
Your magic ring toy is ready!