List of required materials
* YarnArt Jeans (brown) – color 70 – 1.5 mtmagic ring;
* YarnArt Jeans (flesh) – color 73 – 1 skein;
* YarnArt Jeans (white) – color 01 – quite a bit;
* YarnArt Jeans (yellow) – color 58 – 1.5 mtmagic ring;
* Filler (I have holofiber);
* The eyes are black with a diameter of 18mm;
* İncovolomagic ring for magic ringрmagic ring (optional);
* Beaded incovolomagic ring with a diameter of 0.5 mm (you can take a larger
diameter) (for wings);
* Hook (I have No. 1.5);
* Needle for stitching details;
* Scissors;
* Glue;
* Eyelashes (optional);
* Nail polish (white). I paint highlights on their eyes with magic rings.
Conventions
Sc – single crochet;
SL-ST – connecting post;
Pp – lifting loop;
Ch – air loop;
İnc – incibavmagic ring, i.e. in one loop we knit 2 sc;
Dec – decаmagic ring, from two loops we make 1 sc;
* – number of repetitions;
Sl-stн – single crochet;
MAGİC RİNG – amigurumi ring.
Head
We knit yarn Yarnart Jeans color 73 crochet No. 1.5. We’ll head
knit with inc the use of connecting posts and lifting loops (all
the remaining parts of the toy are knitted in a spiral).
İncnote: I knit “baptism with magic rings”.
So, we collect a chain of 10 air loops and, starting from the second
loops from hook magic ring, knit:
1. 2 sc in 1 loop, 7 sc, 3 sc in 1 loop, 6 sc, 2 sc in 1 loop, sl-st, p (20).
2. (inc)*2, 7 sc, (inc)*3, 7 sc, inc, sl-st, pp (26).
3. (sc, inc) *2, 7 sc, (sc, inc) *3, 7 sc, sc, inc, sl-st, nn (32).
4. sc, inc, 2 sc, inc, sc, 7 sc, sc, inc, (2 sc, inc) *2, sc, 7 sc, sc, inc,
sc, sl-st, pp (38).
Why do I knit so hard? All incosto!))) So that our incs do not
were noticeable.
5. (3 sc, inc) *2, 7 sc, (3 sc, inc) *3, 7 sc, 3 sc, inc, sl-st, nn (44).
6. 2 sc, inc, 4 sc, inc, 2 sc, 7 sc, 2 sc, inc, (4 sc, inc) *2, 2 sc, 7 sc, 2
sc, inc, 2 sc, sl-st, pp (50).
7. (5 sc, inc) *2, 7 sc, (5 sc, inc) *3, 7 sc, 5 sc, inc, sl-st, pp (56).
8. 3 sc, inc, 6 sc, inc, 3 sc, 7 sc, 3 sc, inc, (6 sc, inc) *2, 3 sc, 7 sc, 3
sc, inc, 3 sc, sl-st, pp (62).
9. (7 sc, inc) *2, 7 sc, (7 sc, inc) *3, 7 sc, 7 sc, inc, sl-st, nn (68).
10. 4 sc, inc, 8 sc, inc, 4 sc, 7 sc, 4 sc, inc, (8 sc, inc) *2, 4 sc, 7 sc, 4
sc, inc, 4 sc, sl-st, pp (74).
11. (9 sc, inc) *2, 7 sc, (9 sc, inc) *3, 7 sc, 9 sc, inc, sl-st, nn (80).
12. 5 sc, inc, 10 sc, inc, 5 sc, 7 sc, 5 sc, inc, (10 sc, inc) *2, 5 sc, 7 sc, 5
sc, inc, 5 sc, sl-st, pp (86).
13 – 22 (10 rows). 86 sc. Do not forget to knit sl-st at the end of the magic ring of each row
and pp.
In the next row we will make holes for the eyes.
23. 21 sc, 2 ch, 2 sts in the next row incl. magic ring, 11 sc, 2 ch, 2 sts
inc of the next row incopusmagic ring, 50 sc, sl-st, pp (86).
İncnote: your number of columns at the beginning and at the end of the row may
different from mine. It all depends on the way of knitting (I remind you that I knit
cross magic rings, someone knits tick magic rings) and from density. Measure your eyes
incezhde than to make holes. The distance between the eyes remains unchanged
(11 sc).
24 – 30 (7 rows). 86 sc. At the end of the magic ring of each row, sl-st and pp.
At this stage, I insert the eyes.
31. 5 sc, dec, 10 sc, dec, 5 sc, 7 sc, 5 sc, dec, (10 sc, dec) *2, 5 sc, 7 sc, 5
sc, dec, 5 sc, sl-st, nn (80).
32. (9 sc, dec) *2, 7 sc, (9 sc, dec) *3, 7 sc, 9 sc, dec, sl-st, nn (74).
33. 4 sc, dec, 8 sc, dec, 4 sc, 7 sc, 4 sc, dec, (8 sc, dec) *2, 4 sc, 7 sc, 4
sc, dec, 4 sc, sl-st, nn (68).
34. (7 sc, dec) *2, 7 sc, (7 sc, dec) *3, 7 sc, 7 sc, dec, sl-st, nn (62).
35. 3 sc, dec, 6 sc, dec, 3 sc, 7 sc, 3 sc, dec, (6 sc, dec) *2, 3 sc, 7 sc, 3
sc, dec, 3 sc, sl-st, pp (56).
36. (5 sc, dec) *2, 7 sc, (5 sc, dec) *3, 7 sc, 5 sc, dec, sl-st, nn (50).
37. 2 sc, dec, 4 sc, dec, 2 sc, 7 sc, 2 sc, dec, (4 sc, dec) *2, 2 sc, 7 sc, 2
sc, dec, 2 sc, sl-st, pp (44).
38. (3 sc, dec) *2, 7 sc, (3 sc, dec) *3, 7 sc, 3 sc, dec, sl-st, nn (38).
39. sc, dec, 2 sc, dec, sc, 7 sc, sc, dec, (2 sc, dec) *2, sc, 7 sc, sc, dec,
sc, sl-st, pp (32).
40. (sc, dec) *2, 7 sc, (sc, dec) *3, 7 sc, sc, dec, sl-st, nn (26).
41. (dec) *2, 7 sc, (dec) *3, 7 sc, dec, sl-st. (20).
We finish the row with a magic ring with a connecting column, cut the thread, leaving
long ponytail for incising.
We stuff our heads. You can start stuffing earlier. I’m doing it
Now. In problematic places, I help myself with a magic ring with a pencil (I incite
filler so that there are no creases, and our head has a beautiful
round shape).
We begin to make weights.
To do this, I take a long needle (I have it 12 cm) and a magic ringincon thread.
igloo insert on the back of the neck
and I bring it out from the outside of the left eye in the middle.
Then I insert the needle into the middle of the inner side of the same eye
and I bring it out on the outside of my inca eye.
I insert the needle again from the inside of the same eye
and take it out on the back of the neck, retreating a couple of columns from the place where
originally entered.
Pull well and tie a strong knot.
Now we make a tightening of the mouth.
We take all the same needle and magic ringincon thread. Inserting the needle into the front of the neck
and display under the eye, stepping back from it 6 rows.
Note: I have a 4-row indent in the photo. You are indenting 6 rows!!!
Then we insert the needle, stepping back 1 column
and output under the second eye.
Insert the needle again, retreating 1 column
and bring it out on the neck, a couple of columns from the place where it was originally
introduced.
Stretch, tie a knot.
Here’s what we got.
We embroider a nose.
We take a needle and knit the one with which we knitted the head. Insert the needle like this
way (see photo)
and make a few stitches (I do 6).
My nose takes 2 rows. I take out both ends of the thread at the neck and inc
inside the head.
Next, I incline the eyelashes
and embroider eyebrows and mouth.
Now on the eyes of magic rings I paint highlights.
I do it with white nail polish. You may choose not to. Our
girl magic ring and so beautiful magic ring)))
The head is ready!
The next step is to knit a wig for our doll.
To do this, we collect a chain of 10 air chains with a brown thread.
loops and, starting from the second loop from the magic ring hook, we knit in the same way, magic ring and
head from the first to the twelfth row inclusive.
Attention: we will knit the wig in a spiral, i.e. without connecting
columns and lifting loops!!!
13. (11 sc, inc) *2, 7 sc, (11 sc, inc) *3, 7 sc, 11 sc, inc (92).
14 – 27 (14 rows). 92 sc.
We measure our wig on the head and, if everything suits us, we start
tie psl-stn.
28. 92 psl-stn.
We close, cut the thread, leaving a long tail for incishing.
İncnote: your cap parameters (volume and thickness) may vary from
my settings. You may not need to do so many
inc incremental rows, get by with less, or, conversely, add. Same
the most magic ring is also gldecins. Therefore, please, incosesl-ste knitting
incimeryayte your workpiece on the head.
We sew a wig.
Ponytails
With the same brown thread we collect a chain of 63 air loops.
From the third hook from the magic ring loop we knit:
(2 sl-stn, 3 sl-stn in 1 loop) * 20 times (to the end of the row), we make a connecting
column and, without cutting the thread, continue: again we collect a chain of 63
air loops and knit similarly:
(2 sl-st, 3 sl-st in 1 st) *20, sl-st and cast on again.
Thus, we knit 5 spirals.
We knit another one of the same ponytail.
İncishivaem our ponytails.
Horns or antennas (who like magic ring)
We knit with brown thread. The initial tail is left long so that
then incish our horns to the head.
Note: we do not fill the horns. We fill only yellow cones.
1. 6 sc in MAGİC RİNG (6).
2 – 16 (15 rows). 6 sc (6).
Change the thread to yellow.
17. (inc) *6 (12).
18. (sc, inc) *6 (18).
At this point, I am inserting the incowire. I take a piece in about 25 cm.
With the help of pasl-stats, I bend the end of the inco-wire so that it
further not left the antenna and at the same time to fit in
yellow bump.
19 – 21 (3 rows). 18 sc (18).
22. (sc, dec) *6 (12).
23. (dec) *6 (6).
We stuff, we close the remaining loops with a needle, the thread is inc.
We outline the place on the head where our horns will be. I have them right over
tails with magic rings. İncowe put on the free end of the incovolok through the head (I
I grab not only the hat, but the head itself).
We knit the second antenna in the same way as the first.
Now, to fix our horns, we incise them. No wonder we
leaving long tails.
Pens
We knit fingers. On the magic ring, each pen will have 4 of them.
We start knitting with a flesh-colored thread.
1. 7 sc in MAGİC RİNG (7).
2 – 5 (4 rows). 7 sc (7).
We do sl-st. We cut the thread. There will be only one such finger on the pen.
Next, we knit 3 identical fingers magic ring:
1. 6 sc in MAGİC RİNG (6).
2 – 6 (5 rows). 6 sc (6). We do not cut the thread on the last finger.
İnc continue to knit in your hand:
1. 3 sc on the first finger, 3 sc on the second, 6 sc on the third, 3 sc on
second, 3 sc on the first (18).
2 – 4 (3 rows). 18 sc (18).
Now we knit a thumb:
5. 6 sc, connecting sc finger magic ring with a handle, then the magic ring would return
back and inco knit 5 sc on the finger, again connecting the sc of the fingers with the magic ring
pen, 10 sc (23).
6. 6 sc, dec, 4 sc, dec, 9 sc (21).
İncnote: for whom it is difficult to tie fingers, I can add more
such an option: in MAGİC RİNG dial 6 sc, then inc add up to 18 sc in a row and
knit the handle to the desired length.
7 – 8 (2 rows). 21 sc (21).
9. (5 sc, dec) *3 (18).
At this stage, you can fill your fingers. I stuff quite a bit.
10 – 19 (10 rows). 18 sc (18).
Change the thread to yellow.
20.18 sc (18).
21. Behind the back wall of the loop 18 sc (18).
Next, we knit for the entire loop.
22 – 36 (15 rows). 18 sc (18).
Making sl-st, thread about we shave.
In the 21st row inci, we connect the brown thread and tie for the remaining
half loops in this way: (sc, 3 ch) *to the end of the row. Hinges incnext
rows not including the magic ring.
We knit the left handle on the 4th row inclusive in the same way, magic ring and incava.
5. We knit a thumb: 1 sc, connecting sc fingersmagic ring with
handle, 5 sc on the finger, connecting sc of the finger with the hand, 15 sc (23).
6. sc, dec, 4 sc, dec, 14 sc (21).
From the 7th row we knit in the same way, magic ring and the first handle.
legs
İncnote: I am knitting a magic ringрmagic ring toy, therefore, in the case of knitting legs,
I don’t fill them right away. And I will do it when my legs are ready, i.e. after
48th row. If you do not need magic ring magic rings, then as you knit, your legs
you can hit.
So, we begin to knit with a brown thread.
We cast on 10 air loops and, starting from the second loop from the magic ring hook,
knit:
1. 2 sc in 1 st, 7 sc, 3 sc in 1 st, 6 sc, 2 sc in 1 st (20).
2. (inc) *2, 7 sc, (inc) *3, 7 sc, inc (26).
3. (sc, inc) *2, 7 sc, (sc, inc) *3, 7 sc, sc, inc (32).
4. sc, inc, 2 sc, inc, sc, 7 sc, sc, inc, (2 sc, inc) *2, sc, 7 sc, sc, inc, sc
(38).
5. (3 sc, inc) *2, 7 sc, (3 sc, inc) *3, 7 sc, 3 sc, inc (44).
6. 2 sc, inc, 4 sc, inc, 2 sc, 7 sc, 2 sc, inc, (4 sc, inc) *2, 2 sc, 7 sc, 2
sc, inc, 2 sc (50).
Cut out the insole.
My insoles are cut out of such a plastic magic ring.
7. Change the thread to yellow and knit a row behind the back wall of the loop: 50 sc (50).
Next, continue knitting for both walls of the loop.
8 – 12 (5 rows). 50 sc (50).
At this point, I insert the insole.
13. 16 sc, (sc, dec) *8, 10 sc (42).
14.42 sc (42).
15. 12 sc, (sc, dec) *8, 6 sc (34).
16.34 sc (34).
17. 13 sc, (sc, dec) *4, 9 sc (29).
We change the thread to brown and make the binding of our shoe magic ring for the front
the walls of the loops of this row: (the marker is not decirable)
18/1
. (sc, chain 3) * to the end of the row. Columns of the next row
NOT including the magic ring. Tied up, do sl-st, cut the thread, inc.
Here’s what we got.
We still have the back walls of the loops of the 18th row. For them we will continue
knitting.
İnc we connect the white thread to the half-loop where we have a marker and we knit
18/2. 29 sc (29).
19 – 30 (12 rows). 29 sc (29).
31/1
. We make the strapping for the front half loops in the same way, magic ring and in the 18th row:
(sc, 3 ch) *to the end of the row).
31/2
. İnc we connect to the half-loop where we have a marker, a flesh-colored thread
and knit 29 sc (29).
32 – 41 (10 rows). 29 sc (29).
42. inc, (5 sc, inc) *4, 4 sc (34).
43 – 48 (6 rows). 34 sc (34). At the end of the last row we do sl-st.
We cut the thread. One leg is done. We knit the second in the same way as the first, but the thread
do not cut.
Magic ring, as soon as both legs are ready, I insert the magic ring magic ring and
I stuff, helping inc and this magic ring myself with a pencil.
I take a piece of inco-wire (I have an aluminum inc-wire) with a length of approximately 60
see. I fold it in half and make loops at the ends. Insert into legs
(the first knife of the magic ring will be in ours, the second will be left) and I start stuffing. IN
incocésl-ste stuffing, increase the legs so that they do not warp.
Note: unfortunately, I do not know the diameter of my inco-wire, but according to
its thickness is approximately equal to the thickness of a sushi stick.
We connect our legs:
49. 2 sc on the second leg, chain 5, sc with the first leg, 33 sc
on the first leg, 5 sc on the chain, 32 sc on the second leg (78).
Note: sc with the first leg I do in the 15th loop after sl-st. Those. V
at the end of the 48th row, we made sl-st, and now from this connection we
we count the turn of 15 columns and connect the legs. BUT all density and
knitting method is different. Therefore, be sure to measure the legs and only
after the magic ring you will be absolutely sure to connect.
50 – 61 (12 rows). 78 sc (78).
Now we shift the row by 44 sc, i.e. inco knit 44 sc, inco knit 1 more
column and put a marker in it. This is where the row will start.
Change the thread to yellow.
62.78 sc (78).
And again we make 2 bias loops. In the third we put a marker.
63/1
. Behind the back wall of the loop 78 sc (78).
64 – 77 (14 rows). 78 sc (78).
Note: after the 63rd row, I knit a couple more rows and return
for knitting a skirt. It’s more comfortable for me. You can tie it in
end.
So, skirt magic ring:
İnci we connect the yellow thread in the 63rd row, where we left the front
half loops.
63/2
(I’ll label it as 1st row):
1. (sc, 3 sc in 1 loop) *to the end of the row (156).
2 – 21 (20 rows). 156 sc (156).
22. (10 sc, dec) *13 (143).
At the end of the row we make sl-st, cut the thread. We tie brown incyazhey like this
same, magic ring and shoes.
Now we return to the body. We finished knitting on the 77th row.
78. (11 sc, dec) *6 (72).
79.72 sc (72).
80. 5 sc, dec, (10 sc, dec) *5, 5 sc (66).
81.66 sc (66).
82. (9 sc, dec) *6 (60).
83.60 sc (60).
84. 4 sc, dec, (8 sc, dec) *5, 4 sc (54).
At this stage, I stuff the toy and knit the handles.
I measure and mark needles with magic rings.
85. 12 sc, 6 sc on the arm and body together, 21 sc, 6 sc on the second arm and body
together, 9 sc (54).
86. 12 sc, 12 sc in the hand, 21 sc, 12 sc in the second th hand, 9 sc (66).
At this stage, I insert magic rings into the pens and stuff (just a little).
I repeat: you can knit without magic rings!
87. (4 sc, dec) *11 (55).
88.55 sc (55).
89. (3 sc, dec) *11 (44).
90. 5 sc, dec, 3 sc, dec, 2 sc, dec, 5 sc, dec, 5 sc, dec, 2 sc, dec, 3 sc, dec, 3
sc, dec (36).
We change the thread to body and knit the next row behind the back wall of the loop.
91. for s/n 36 sc (36).
Don’t forget to stuff our doll.
92 – 96 (5 rows). 36 sc (36).
We make sl-st, cut the thread, leaving a long tail for incishing.
Now we return to the row where we have half loops and
we tie brown incyazhey in the same way, magic ring we did it with shoe magic rings and
skirt.
The next step is to incise the head. It won’t be easy
BUT! if you were able to connect this doll, then with this difficulty
sincave)))
I measure the head and fix it with the help of needles. İncishivayu.
I sew in this way: I make a stitch on the head, pull out the thread, then
I make a stitch on the neck, pull the thread and so on until the end.
Now we will knit spots.
With a brown thread in MAGİC RİNG we collect 6 sc. This will be our first row.
2. (inc) *6 (12).
3. (sc, inc) *6 (18).
4. sc, inc, (2 sc, inc) *5, sc (24).
We cut the thread. Who will incise, leaves a long tail for
Inc. I will incicle.
We knit 14 such spots.
wings
With yellow incyazhey we collect 3 ch and one more lifting loop.
Starting from the second loop from the magic ring hook, we knit:
1. inc, sc, inc, pp. We unfold knitting.
2.5 sc, paras. U-turn.
3. inc, 3 sc, inc, paras. U-turn.
4. 7 sc, paras. U-turn.
5. inc, 5 sc, inc, paras. U-turn.
6.9 sc, paras. U-turn.
7. inc, 7 sc, inc, paras. U-turn.
8. 11 sc, paras. U-turn.
9. inc, 9 sc, inc, paras. U-turn.
10.13 sc, paras. U-turn.
11. inc, 11 sc, inc, paras. U-turn.
12.15 sc, paras. U-turn.
13. inc, 13 sc, inc, paras. U-turn.
14. 17 sc, paras. U-turn.
15. inc, 15 sc, inc, paras. U-turn.
16. 19 sc, paras. U-turn.
17. inc, 17 sc, inc, paras. U-turn.
18.21 sc, paras. U-turn.
19. inc, 19 sc, inc, paras. U-turn.
20.23 sc, paras. U-turn.
21. inc, 21 sc, inc, paras. U-turn.
22.25 sc, paras. U-turn.
23. inc, 23 sc, inc, paras. U-turn.
24. 27 sc, paras. U-turn.
25. inc, 25 sc, inc, paras. U-turn.
26.29 sc, paras. U-turn.
27. inc, 27, inc, paras. U-turn.
28 – 31 (4 rows). 31 sc, paras. U-turn.
32. the first loop incopusmagic ring, 28 sc, dec, pp.
33.29 sc, paras. U-turn.
34. first loop incopusmagic ring, 26 sc, dec, pp. U-turn.
35.27 sc, paras. U-turn.
36. first loop incopusmagic ring, 24 sc, dec, pp. U-turn.
37.25 sc, paras. U-turn.
38. first loop incopusmagic ring, 22 sc, dec, pp. U-turn.
39.23 sc, paras. U-turn.
40. the first loop incopusmagic ring, 20 sc, dec, pp. U-turn.
41. first loop incopusmagic ring, 18 sc, dec, pp. U-turn.
42. first loop incopusmagic ring, 16 sc, dec, pp. U-turn.
43. first loop incopusmagic ring, 14 sc, dec, pp. U-turn.
44. first loop incopusmagic ring, 12 sc, dec, pp. U-turn.
45. the first loop incopusmagic ring, 10 sc, dec, pp. U-turn.
46. the first loop incopusmagic ring, 8 sc, dec, sl-st. We cut the thread.
Next, we tie our wing.
To do this, I inc connect the brown thread where we started knitting from 3
ch. We made a loop with a brown thread and now we put a beaded one into it
incowire. İncizhimaem incovoloku to the winglet and start tying psl-stn by
the whole wing (we get the magic ring between the hook and the thread). I don’t
I count how many half-columns I get. Here for you
discretion. The main thing is to make sure that the canvas does not shrink (this can
arise from the fact that psl-stn are rarely connected). But too much is also not
need to.
We tied it, we cut the thread and the inco-wire, the tails are incised.
We knit the second wing in the same way as the first.
Next, I incise the spots: 4 pieces on the magic ring each wing and 6 pieces on
dress. İncishivayu wings.
Our magic ring doll is ready!